Stair LED Lighting - Stair light Fixture Manufacturer & Оптовик
- What is a Stair LED Lighting Fixture
- Classification of Stair LED Lights
- Anatomy of a Stair LED Batten Light
- Comparison Between LED Fixtures and Traditional Stair Fixtures
- Features of Stair LED Light Fixtures
- Некоторые серии продуктов и спецификации продуктов лестницы
- Часто задаваемые вопросы
What is a Stair LED Lighting Fixture
Stair LED Lighting Fixtures - a made-to-order luminaire designed specifically for the vertical paths of staircases. Scrap the general area lighting, this is a precision tool built to tackle the safety and compliance headaches that everyone knows are a real pain. At their core, these light fixtures have three main jobs to tackle: they're supposed to create a clear visual contrast between the treads and risers, ensure consistent brightness to meet the required safety standards (OSHA and ADA, например), and keep glare to a minimum so people don’t get disoriented.
When you get down to the nitty-gritty, these are top-end systems that stand out from the pack by their ability to deliver light exactly where it's needed - that's more about photometric distribution and less about the wattage. They need to be robust - with high dust/impact ratings built in, конечно - and when you're installing them in big commercial settings, a modular design that makes it a snap to do maintenance and integrates with fancy new controls (затемнение, motion sensors and the like) is a real bonus. When you buy from quality suppliers like COMLED, you're not just buying some LEDs - you're getting certified performance and peace of mind that your safety risks are being properly managed.
Classification of Stair LED Light Fixtures
Treating stair lighting as a unified system is what separates a smooth project from a problematic one. The fixture selection—ranging from straightforward ceiling-mounted units to protected wall- or riser-level step lights and even LED-integrated handrail solutions—shapes everything from installation workload to long-term serviceability and energy performance.
Stairwell lighting is more than just a basic overhead glow. It's safety, it's compliance, it's visual direction and it's how well your building will stand the test of time. Focus on COMLED's industrial-grade LED luminaires, using these high-quality modular lighting fixtures as a benchmark to evaluate their practical applicability in demanding environments. Below we have grouped stair lighting options by function, form factor and installation method.
я. Function Categories
1. Stair Tight / Vapor-Tight Lights
Stair Tight / Vapor-Tight Lights are engineered for continuous illumination in dirty, damp, or particulate-laden stairwells. Featuring sealed enclosures and rugged, impact-resistant construction, these fixtures incorporate high-quality polycarbonate diffuser panels, aluminum heat sinks, and IP66/IK10 protection ratings.These are just like some of our L/K-type linear fixtures: 18ш, 36w or 44w power options, high efficiency SMD2835 LEDs, 110 - 130 люмен на ватт, quick wire up terminals, датчик затемнение (100 - 20 - ВЫКЛЮЧЕННЫЙ) and a 54,000 hour service life.
2. Stair Tri-Proof Lights (Водонепроницаемый, Пыленепроницаемый, Коррозионная устойчивость)
You use these in coastal, chemical or dusty sites. They combine environmental sealing with corrosion-resistant materials and come with IP65–IP66 protection and IK08–IK10 impact strength. We have COMLED’s M-type (IP65 ИК10, 120–150 lm/w, необязательный 3 hour emergency kit) and our P1-type (IP65 ИК08, 110–140 lm/w, optional microwave sensor / emergency kit) models that pretty much embody this type.
3. Stair Waterproof / Weatherproof Lights
If you're using your stairway outdoors or in semi-exposed areas then you need lights that can withstand it. These fixtures need to keep water out, be resistant to UV damage and maintain their lumen output no matter the temperature. IP65-rated bulkhead-type or compact linear housings are a pretty common solution.
4. Stair Sensor-Controlled Lights
These use sensors and can dim down to save energy while still keeping your stairwell safe and lit. They kick in and kick back out depending on whether there's movement around. It's a way to extend the life of the products and to line up with modern automation trends.
5. Stair Emergency Lights
The evacuation function of stairwells is also crucial. Stair Emergency Lights ensure rapid and safe evacuation of occupants from buildings during emergencies.Check that your lights have got what you need like long battery life and reliable charging systems. We use modular emergency units in our M-type and P1-type fixtures as part of our commercial building solutions.
|
|
|
II. Form-Factor and Design Categories
1. Linear / Batten Stair Lights
Linear stair lights create continuous illumination along long stair runs or open stair towers. Their optical uniformity and straightforward cable routing make them suitable for industrial and commercial circulation spaces.
Two common sub-types include:
- Stair Wraparound Lights: Diffused soft lighting suitable for public stairwells and commercial buildings.
- Stair LED Tube Lights: Компактный, easy-to-maintain design ideal for retrofit projects; particularly suited for high-traffic industrial staircases.
Typical COMLED-grade specifications in this category include 18W / 36Вт / 44W configurations, 110–150 lm/W efficacy, 3000K–6500K CCT range, SMD2835 светодиодные чипсы, and surface or suspended installation.
2. Stair Round Ceiling Lights
Round ceiling lights provide supplemental ambient lighting in mid-landings or tight stair segments. They follow the performance logic of COMLED’s C-series—stable output, uniform diffusion, and reliable thermal balance—making them ideal for low-ceiling transitions or enclosed stair bays.
Bulkhead lights offer rugged, enclosed housings suited for outdoor or semi-exposed stairways. Oyster-style fixtures prioritize compact profiles and ease of maintenance for public interiors. Both types should maintain IP65+ sealing and IK08+ impact performance to withstand rigorous use.
Iii. Installation-Based Categories
1. Stair Surface-Mounted Ceiling Lights
A surface-mounted ceiling configuration remains the most practical approach for fast installation and straightforward maintenance. It is widely adopted in retrofit projects, buildings with limited ceiling space, and scenarios where project timelines and inspection compliance are critical. Combined with quick-connect wiring and modular driver components, this setup further enhances both installation efficiency and long-term serviceability.
2. Wall-Mounted Stair LED Lights
Wall-mounted luminaires provide targeted illumination toward the steps, strengthening edge contrast and improving orientation. They work especially well in schools, промышленные объекты, and high-traffic commercial stair cores. Their accessibility makes maintenance simpler than ceiling-mounted alternatives.
3. Висит / Suspended Stair LED Fixtures
Suspended linear fixtures deliver high uniformity in tall stair shafts or open atriums. They distribute general illumination across landings but should be paired with wall-mounted or step-level lighting to satisfy step-edge contrast requirements and safety codes.
Engineering Breakdown: Anatomy of a Stair LED Batten Light
We aren't just talking about a housing and a strip; we're talking about a thermal and electrical ecosystem designed to survive 50,000+ hours of duty cycles. Here is what’s under the hood of COMLED’s linear stair fixtures and why the architecture matters for your bottom line.
1. The Light Engine: Stability Over Raw Power
It starts with the chipset. We don’t rely on generic emitters that drift in color after 1,000 часы.
- Component Choice: We utilize SMD2835 LED chips for a specific reason: thermal efficiency. These chips offer a superior surface area for heat dissipation relative to their output, ensuring high luminous efficacy (лм/Вт) without cooking the phosphor.
- The Result: You get consistent color uniformity (tight binning) and sustained brightness (Л70) essential for stairwells where safety codes demand reliable foot-candles year-round.
2. Driver Architecture: The "Split" Advantage
The driver is the heart of the system—and historically, the first thing to fail.
- Maintenance-First Design: Unlike sealed units that require tossing the whole fixture when a capacitor dries out, COMLED adopts a split power supply configuration.3 The driver is accessible. This means if a unit goes down, your maintenance crew swaps the driver, not the entire luminaire.
- Electrical Hygiene: We use constant current driving with high-grade components to eliminate standard "stairwell flicker." The system manages AC-to-DC rectification with active Power Factor Correction (PFC), ensuring the fixture doesn't introduce harmonic noise (THD) back into your building’s grid.
3. Thermal & Mechanical Housing
Heat is the enemy of LED longevity. The housing isn't just a shell; it’s an active thermal management system.
- Material Science: We pair a rigid aluminum alloy backbone—which acts as the primary heat sink—with a high-impact Polycarbonate (ПК) diffuser.
- Dual Function: The aluminum pulls heat away from the junction point of the LEDs, while the PC cover provides necessary IK impact resistance (crucial for public stairwells) and diffuses the light to eliminate "hot spots" and glare that can blind users on ascent.
4. Critical Systems: Чрезвычайная ситуация & Контроль
In a modern BOM (Bill of Materials), a light is also a safety device and an energy manager.
- Emergency Module (Необязательный): We don't rely on old NiCd tech. Our optional emergency backup integrates high-density capacitors or LiFePO4 batteries. This ensures that when the mains cut out, the fixture instantly switches to emergency mode, holding the code-mandated lux levels for the required 90+ минуты.
- Sensor Integration: The structure allows for integrated microwave or PIR sensors. This enables "Step-Dimming" logic (например, 100% on presence, dropping to 20% поддерживать), slashing energy waste without plunging the stairwell into total darkness.
Comparison Between LED Fixtures and Traditional Stair Fixtures
LED stair fixtures leave traditional alternatives in the dust when it comes to the things that really matter to facility managers, contractors and wholesalers - like how little power they need, and how much light they actually produce. That's not all though - these puppies can still shine just as bright at a fraction of the wattage of their old-tech counterparts, and they can keep on going and going and going - which means lower energy bills for all you commercial and public stairway folk out there. The lifespan of an LED is measured in the tens of thousands of hours, which means less need for replacement and all that comes with it - like burning a hole in the maintenance budget, and having to call in the workhand to sort it all out.
And then there's the whole reliability and safety picture - which is pretty neat too. LEDs don't contain any of the bad stuff that we don't want floating around the planet, so when it comes time to dispose of them, it's as simple as can be - no worries, no fuss. And let's not forget instant-on performance, no weird flickering and all that jazz - LEDs can talk to smart control systems and sensors without any trouble, which is a real revelation compared to the old lights that just sort of... falter. And we haven't even mentioned the many colours - or the fact that they don't make your eyes go funny - which is a big plus for places that have to keep the lights on for a long time.
Now some folks might be thinking that the high upfront cost is a bit of a sticker-shocker, but trust us, the rapid ROI that comes with the territory is worth every penny. Фактически, LEDs are more than just a lighting upgrade - they're a long-term investment in making sure everything runs smoothly, safely and on cue - which is a whole lot more than you can say for old-stylish stair fixtures.
LED Stair Fixtures vs. Traditional Stair Fixtures
| Feature | LED Stair Fixtures | Traditional Stair Fixtures (Incandescent / Fluorescent) |
|---|---|---|
| Энергоэффективность | Peak efficiency; minimal heat loss. |
Low; heavy energy waste via heat. |
| Продолжительность жизни | 50,000+ часы; built to last decades. |
1,000–15 000 часов; frequent burnouts. |
| Стоимость технического обслуживания | "Set and forget"; near-zero labor. |
High, requires ongoing replacement and labor |
| Environmental Safety | Non-toxic; 100% recyclable. |
Contains mercury; requires toxic disposal. |
| Startup & Stability | Instant full brightness; zero flicker. |
Delayed start; prone to buzzing/flicker. |
| Затемнение / Контроль | Native sensor & dimming support. |
Basic on/off; difficult to automate. |
| Color Quality / Визуальный комфорт | Wide CCT range, high CRI, flicker-free. | Poor color rendering; high visual fatigue. |
| Integration with Modern Buildings | Compatible with building management and energy systems. | Analog only; requires costly retrofitting. |
| Total Cost of Ownership | Higher initial cost, lowest lifetime cost. | Cheap entry; expensive to run and fix. |
Features of Stair LED Light Fixtures
1. The Lowdown on ROI: How High-Efficiency LED Fixtures Save You Real Money
New Stair LED Fixtures are delivering a serious performance boost. We're consistently seeing a really impressive 110-150 Lumens per Watt (лм/Вт) rate of efficacy - that's a whole lot better than traditional options.
This isn't just a minor reduction in costs; it's a whole new ball game. Swapping out even moderately used fixtures (like ten 80W incandescent units) with high-efficiency 20W LEDs cuts energy consumption by a staggering 90% или больше. And that translates directly into a solid return on investment (ROI) and reduces the total cost of ownership (ТШО) in a big way. For contractors and facility managers out there, specifying high-efficacy units is the fast track to delivering guaranteed, quantifiable operational savings - that's how you win long-term client contracts.
2. The Long and Short of It: How Long-Lasting LED Fixtures Save You Headaches
Here's the harsh reality: every replacement light is a service call - and that's a labour cost and potential disruption to a commercial space. Quality Светодиодные светильники can run for 50,000+ operational hours on a single set before they need replacing - that's a factor of five or more better than linear fluorescent systems.
That durability means you're not just reducing replacement frequency - you're actively cutting down on maintenance liability. For high-traffic areas, reducing the need for access requirements (ladders, lifts or closing off stairwells) cuts down on site disruption и overall lifecycle expenses. Плюс, specifying systems with remotely accessible drivers is a smart engineering move - it means you can troubleshoot and repair quickly without needing to dismantle the fixture itself.
3. Safety Compliance and Risk Management
Stair lighting is basically a safety feature - и не зря. High-end LED fixtures deliver predictable, sustained code compliance - which is a must-have for mitigating client liability.
Key features that distinguish commercial-grade fixtures:
- Glare Control & Uniformity: Using asymmetric optics и advanced diffusers to ensure even light distribution - no more hazardous shadows или hotspots that can get in the way. And with glare minimised, you're not leaving your clients vulnerable to accidents.
- IP/IK Ratings:If installed in indoor or outdoor public areas, this requirement is essential. Ensure the luminaire meets at least IP65 dust and water resistance standards and possesses IK08+ vandal resistance.
- Emergency Egress: Fixtures need to be available with emergency battery modules (often those LiFePO4 ones for longevity) or be explicitly rated for connection to centralized emergency circuits. Don't mess up on emergency standards - that's just asking for a failed occupancy inspection.
4. Precision Illumination, Architectural Integration and Looking Good
The old days of general illumination on stairs are over. Modern LED systems use light as a precise guide:
- CCT and CRI Control: You want a Colour Rendering Index (ЦРИ 80+) to make sure materials on the treads are accurately perceived - that's safety and aesthetic quality in one go. И Цветовая температура (ССТ) is totally custom-able: 3000К for a relaxed vibe (отели) vs 4000К for a bright, alert look (commercial offices).
5. Smart Controls - The Key to Unlocking Efficiency and Flexibility
With smart controls in the mix, lighting is no longer just a static utility, but an actual active energy management tool that can save you money.
- Motion Activated Dimming - The Go-To For 24/7 Facilities: Lights are put into a low power mode, maybe 20% output, and only kick in to full power when they're actually needed - that's when a PIR or microwave sensor picks up on movement. This is a win-win: it prolongs the lifespan of your LEDs while significantly slashing power bills during off-peak hours.
- Networked Control - The Heart of Modern Buildings: Modern fixtures are designed to work with protocols like DALI or 0-10V, allowing them to slot seamlessly into larger Building Management Systems (Бит). This opens up a world of possibilities - планирование, remote monitoring and fault diagnosis that's a must for managing large portfolios.
- Being Able to Adapt: The ability to configure scenes or stepped dimming patterns right after install lets you tweak the lighting to fit changing needs without having to shell out for new hardware.
Некоторые серии продуктов и спецификации продуктов лестницы
J1 Series parameter data:
| Модель | Входное напряжение | Ватт | Датчик затемнения в режиме ожидания | Чрезвычайная ситуация |
| ZL-JSBLP20-2FT-CN | 110 В переменного тока или 230 В переменного тока | 20ш | Икс | Икс |
| Zl-jsblp36-4ft-cn | 110 В переменного тока или 230 В переменного тока | 36ш | Икс | Икс |
| ZL-JSBLP20-2FT-CS | 110 В переменного тока или 230 В переменного тока | 20ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | Икс |
| Zl-jsblp36-4ft-cs | 110 В переменного тока или 230 В переменного тока | 36ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | Икс |
| ZL-JSBLP20-2FT-CE | 110 В переменного тока или 230 В переменного тока | 20ш | Икс | >3час при 3,6 Вт |
| Zl-jsblp36-4ft-ce | 110 В переменного тока или 230 В переменного тока | 36ш | Икс | >3час при 3,6 Вт |
| ZL-JSBLP20-2FT-CES | 110 В переменного тока или 230 В переменного тока | 20ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | >3час при 3,6 Вт |
| ZL-JSBLP36-4FT-CES | 110 В переменного тока или 230 В переменного тока | 36ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | >3час при 3,6 Вт |
| Примечание: Икс -Нет эта функция | ||||
P1 Series parameter data:
| Модель | Входное напряжение | Ватт | Датчик затемнения в режиме ожидания | Чрезвычайная ситуация |
| ЗЛ-ПСБЛП20-2FT-CN | 110 В переменного тока или 230 В переменного тока | 18ш | Икс | Икс |
| ЗЛ-ПСБЛП40-4FT-CN | 110 В переменного тока или 230 В переменного тока | 36ш | Икс | Икс |
| ЗЛ-ПСБЛП60-5FT-CN | 110 В переменного тока или 230 В переменного тока | 44ш | Икс | Икс |
| ЗЛ-ПСБЛП20-2FT-CS | 110 В переменного тока или 230 В переменного тока | 18ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | Икс |
| ЗЛ-ПСБЛП40-4FT-CS | 110 В переменного тока или 230 В переменного тока | 36ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | Икс |
| ЗЛ-ПСБЛП60-5ФТ-КС | 110 В переменного тока или 230 В переменного тока | 44ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | Икс |
| ZL-PSBLP20-2FT-CE | 110 В переменного тока или 230 В переменного тока | 18ш | Икс | >3час при 3,6 Вт |
| ZL-PSBLP40-4FT-CE | 110 В переменного тока или 230 В переменного тока | 36ш | Икс | >3час при 3,6 Вт |
| ZL-PSBLP60-5FT-CE | 110 В переменного тока или 230 В переменного тока | 44ш | Икс | >3час при 3,6 Вт |
| ЗЛ-ПСБЛП20-2ФТ-ЦЕС | 110 В переменного тока или 230 В переменного тока | 18ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | >3час при 3,6 Вт |
| ZL-PSBLP40-4FT-CES | 110 В переменного тока или 230 В переменного тока | 36ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | >3час при 3,6 Вт |
| ZL-PSBLP60-5FT-CES | 110 В переменного тока или 230 В переменного тока | 44ш | 100% / 20% /ВЫКЛЮЧЕННЫЙ | >3час при 3,6 Вт |
| Примечание: Икс -Нет эта функция | ||||
Часто задаваемые вопросы：
How do I get the right LED Batten Light for that tricky stairwell of mine?
Don't just go off the length, work out the actual illuminance you need. For any commercial stairway, you're looking at 50-100 lux on every tread. And if that stairway is a fire escape or some back-of-house area, you'll want a batten with an emergency module built right in (LiFePO4 batteries are the best) along with some motion sensors for good measure. Check the beam angle - a standard 120° beam is fine for a general wash, but if you're mounting high up, you're going to want a tighter angle to make sure the light actually hits the floor and not the walls.
How hard are commercial LED stair lights to install or retrofit anyway?
Not too tricky. If you're wasting hours on one light fitting, you've probably picked the wrong one. Look for ones that are designed to be easy to install, с snap brackets и quick connect terminals or modular backplates that make life easy for the contractor. And if you're doing retrofits where you can't run new wires, look for wider bodied fittings to cover up old paint lines and stuff.
What's the real deal with maintenance for LED stair lighting then?
Forget about changing bulbs - you should be thinking about the driver instead. Sure the LED chip itself might last 50,000 hours without complaint, but the driver is usually what gives out first, especially in poorly ventilated stairwells. So you'll need to check the battery discharge cycles (which a lot of smart fixtures will handle automatcially) and make sure dust isn't stopping the heat sinks from doing their job. If you want to get really low maintenance, look for fixtures with remote drivers or tool-less panels so a failure isn't a massive headache.
Can I get these stair lights to talk to my BMS or Smart Automation system then?
Абсолютно. In a commercial setting, you can't just have dumb light bulbs with no brains. You want full protocol compatibility. Look for 0-10V Dumming или DALI interfaces, or even integrated microwaves with corridor functions (like dimming to 20% when the stairs are empty, or ramping up to full power when someone moves around). That's not just a fancy feature, that's real cost savings and a longer life for your lights.
What are the top "Pro Tips" for picking stair lighting then?
- Get a handle on glare: don't blast people in the face with high lumen light output at eye level. Use some asymmetric lenses or recessed lights to throw the light down, not out.
- Don't forget about durability: if this is a public stairwell, you'll want IK08 или выше (impact resistant) to handle any vandalism or lucky hits from moving equipment. And for any exterior bits, IP65 is a must.
- Stick to a consistent colour temp: so it doesn't look like a mishmash of different colours in your stairwell. Try to stick with either 4000K for commercial alertness or 3000K for hospitality warmth, and make sure the binning is tight.