Best LED Waterproof Batten Light for Garage
- Finish Color : Milky(White) + Gray
- Mount Type: Suspension mounted, Wall or Ceiling Surface-Mounted
- Light Bulb Type: LED
- Category: Hanging Lights, Emergency & Exit Lights, Waterproof Lights
- Brightness: 2000 – 6000 lumens
- Shade Material: Polycarbonate (PC)
- Light Fixtue Wattage: 18W/ 36W/ 44W
- Dimensions: 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm
- Style: Batten Lights
- Decor Style: Modern
- Features: Indoor or Outdoor, Dimmable Sensor, Emergency Function
- Description
- Additional information
- Inquiry
Description
Best LED Waterproof Batten Light for Garage, IP65 IK08, Sensor dimming, Emergency Function, Wall or Ceiling Surface-Mounted Fitting. CE, SAA, LCP, ISTMT and TM21 certified. Vapor-Tight LED Batten Fixture
The LED Waterproof Batten Light is a vapor-tight, high-reliability linear luminaire for commercial and industrial applications — garages, underground parking, tunnels, warehouses, electrical rooms and marine applications. Polycarbonate (PC) base and high-transmittance (86%) milky PC diffuser. Even, low-glare light across wide areas, moisture, dust and impact resistant.
Mechanical and protection features: IP65 and IK08. Suitable for wet locations, dusty environments and high-traffic zones. Slim profile minimizes visual clutter, maximizes usable light. Materials and fastening options (stainless steel or PC clips) for easy installation and maintenance.
LED Waterproof Batten Light basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK08-Rated Seal: Silicone gasket and IK08-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
LED Waterproof Batten Light Main advantages
LED Waterproof Batten Lights offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK08), weatherproof, dustproof and impact resistance.
LED Waterproof Batten Light Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
Application:
This LED Waterproof Batten Light is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking garage.
|
|
|
LED Waterproof Batten Light size dimension:
Packing Specification:
Installation methods:
Our Competitive Advantages:
1. ODM/OEM services available; samples provided; customization options for brand and function.
2. COMLED Technology is a leading provider of emergency LED Waterproof Batten Lighting solutions, with a decade of expertise in designing, manufacturing, and selling LED Waterproof Batten Lights.
3. Factory area: 2,000 m²; Production capacity: 30,000 units per month.
4. All LED fixtures undergo rigorous quality control.
5. Our LED Waterproof Batten Lights are certified CE, SAA, LCP, ISTMT, and TM21, and meet regional electrical codes and safety standards.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Guess you’re asking:
1. What is the luminous efficacy of LED Waterproof Batten Light ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the LED Waterproof Batten Light?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the LED Waterproof Batten Light?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the LED Waterproof Batten Light use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of LED Waterproof Batten Light?
The fixture has a high protection rating of IP65 and IK08.
7. What sizes and power options are available for the LED Waterproof Batten Light?
The LED Waterproof Batten Light comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the LED Waterproof Batten Light wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the LED Waterproof Batten Light have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of LED Waterproof Batten Light?
LED Waterproof Batten Light with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Conclusion
The LED Waterproof Batten Light is a no-nonsense choice for large projects that need durability, low maintenance and clear cost benefits. For volume pricing, OEM customization (lens options, clip material or preset sensor profiles) or integrated emergency/sensor packages, COMLED’s procurement team can provide quotes and BOM support. For lighting layouts, please share a floor plan with the technical team so we can suggest optimal spacing, lumen targets and linkable run configurations for your application.
FAQs:
How does the 5.8 GHz HF sensor dimming mode work and what are the commissioning options for the LED Waterproof Batten Light?
The 5.8 GHz HF sensor uses microwave detection to detect motion through small obstructions, perfect for semi-enclosed areas. The standard factory configuration is a three-stage profile: 100% → 20% → OFF, where the light remains at full output while motion is detected, drops to a low-standby level after vacancy delay and then turns off after a longer timeout. Commissioning options include detection range, hold-time (time to dim after no motion), ambient light threshold (disable activation during daylight) and remote reprogramming for sensor equipped batches. For large deployments, COMLED can pre-set sensor profiles per aisle or application to reduce on-site tuning time.
What does the emergency function (>3 hours @ 3.6 W with 3000 mAh LiFePO₄) mean in practice for evacuation route lighting?
The emergency version provides at least 3 hours of continuous light at 3.6 W with an internal 3000 mAh LiFePO₄ battery pack. In practice this means compliant lighting levels for short to medium evacuation routes and critical egress points during extended outages. LiFePO₄ chemistry offers stable discharge, better thermal stability and longer calendar life than many others. COMLED offers 1 year warranty on the battery and replacement packs as part of lifecycle service plans; for project specs requiring longer autonomy or higher lux levels our technical team can calculate run times and recommend which fixtures or additional emergency units to use.
When specifying continuous linked runs what electrical and mechanical constraints should be considered?
Mechanically the batten’s clip and linkable end caps allow for continuous linear runs to create seamless lighting. Electrically linked runs must respect the supply conductor current rating and total power draw of the run – long continuous runs increase inrush and cumulative load. COMLED’s standard approach is to define recommended maximum run lengths per circuit in the project datasheet based on the chosen model (18 W / 36 W / 44 W) and supply parameters; typical practice is to limit continuous linked runs to the point where voltage drop and driver loading remains within the manufacturer’s limits. For larger projects send the layout and supply details to COMLED’s technical team and we will provide a safe, code compliant wiring diagram and suggested junction points.
How does IP65/IK10 perform to maintenance savings over time compared to non-vapor-tight battens?
IP65 sealing prevents dust from accumulating on the internal optics and protects the electronics from moisture ingress, reducing lumen depreciation caused by particulate buildup and corrosion. IK10 impact resistance reduces fixture damage from accidental knocks or tool strikes during maintenance and operations. Together these ratings lower failure rates, reduce unplanned replacements and extend scheduled maintenance intervals. The clip fixed driver and easy access terminal block reduces on-site labour time when servicing is required. For asset managers this usually means lower total cost of ownership (TCO) over the life of the light compared to non-vapor-tight fixtures.
Can I get factory customization (marking, clip type or pre-wired sensor settings) for bulk orders?
Yes. COMLED offers customization for volume buys: clip material (stainless steel or PC), pre-set sensor profiles, pre-wired linkable assemblies and factory applied markings or labels for easier site identification. For large projects we recommend specifying these options at the RFQ stage so production can be arranged to minimize on-site labour and commissioning time. Contact the procurement team with your project quantities and requirements for a quote and lead time.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
