Bracket Tri-proof Light Fitting, Batten Vapor Tight Light
This Bracket Tri-proof Light Fitting adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
- Description
- Additional information
- Inquiry
Description
What is Bracket Tri-proof Light Fitting?
A Bracket Tri-proof Light Fitting is a tough Batten Vapor Tight Light designed for fast and secure installation via mounting brackets. Sealed polycarbonate housing and high-transmittance (86%) PC diffuser provides complete protection against water, dust and mechanical impact (IP65/IK10). Available in 18W (2 ft), 36W (4 ft) and 44W (5 ft) versions, each unit has a fixture-level efficacy of 118–140 lm/W, 120° beam angle and 54,000 hours life. Choose from standard, motion-sensor dimming (5.8 GHz HF, 100–20–OFF) or emergency-ready models (3 h @ 3.6 W with 3000 mAh LiFePO₄ battery), all backed by 5 year warranty.
Bracket Tri-proof Light Fitting basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK10-Rated Seal: Silicone gasket and IK10-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
Bracket Tri-proof Light Fittings Main advantages
Bracket Tri-proof Light Fittings offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
Bracket Tri-proof Light Fitting Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About Bracket Tri-proof Light Fitting, Guess you’re asking:
1. What is the luminous efficacy of Bracket Tri-proof Light Fitting ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the Bracket Tri-proof Light Fitting?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the Bracket Tri-proof Light Fitting?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the Bracket Tri-proof Light Fitting use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of Bracket Tri-proof Light Fitting?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the Bracket Tri-proof Light Fitting?
The Bracket Tri-proof Light Fitting comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the Bracket Tri-proof Light Fitting wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the Bracket Tri-proof Light Fitting have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of Bracket Tri-proof Light Fitting?
Bracket Tri-proof Light Fitting with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This Bracket Tri-proof Light Fitting is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of Bracket Tri-proof Light Fittings for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our Bracket Tri-proof Light Fittings are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Bracket Tri-proof Light Fitting size dimension:
Packing Specification:
Installation methods:
Conclusion
In summary the Bracket Tri-proof Light Fitting is perfect for demanding industrial and commercial applications. Its robust build and advanced protection features means reliable performance and longevity. Designed for high risk areas it’s both durable and efficient so a great investment for maintaining optimal lighting in tough environments.
Related Questions and Answers:
What makes the Bracket Tri-proof Light Fitting suitable for harsh environments?
The Bracket Tri-proof Light Fitting is designed to withstand harsh conditions with its tri-proof features: water resistant, dust resistant and impact resistant. Its enclosures are sealed to prevent water and dust ingress and its materials and design can withstand mechanical impacts. This makes it ideal for areas like production lines and warehouses where water, dust and physical impacts are common.
How does the Bracket Tri-proof Light Fitting compare to traditional lighting solutions?
Unlike traditional lighting solutions that may not offer sufficient protection against environmental factors the Bracket Tri-proof Light Fitting offers more durability with its tri-proof technology. Traditional lights may fail or require more maintenance when exposed to harsh conditions whereas the Bracket Tri-proof Light Fitting is designed to perform reliably and reduce maintenance needs. Its energy efficiency also means long term cost savings compared to less durable options.
Can the Bracket Tri-proof Light Fitting be used in different installation settings?
Yes the Bracket Tri-proof Light Fitting is very versatile and can be used in various mounting options. Its design allows for easy adaptation to different installation settings whether on walls, ceilings or other surfaces. This flexibility means it can meet the specific lighting needs of different environments from industrial to commercial spaces without compromising its performance or durability.
What are the benefits of using the Bracket Tri-proof Light Fitting in industrial applications?
The benefits are durability which means less replacement and maintenance and resistance to water, dust and impact so reliable operation in tough environments. Energy efficiency means lower operational costs and the design means a safer and more productive working environment with consistent and high quality lighting.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
