Dust Proof LED Batten Lamp, LED Tri-Proof Light Manufacturer
This LED Triproof Batten Light adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
- Finish Color : Milky(White) + Gray
- Mount Type: Suspension mounted, Wall or Ceiling Surface-Mounted
- Light Bulb Type: LED
- Category: Hanging Lights, Emergency & Exit Lights, Waterproof Lights
- Brightness: 2000 – 6000 lumens
- Shade Material: Polycarbonate (PC)
- Light Fixtue Wattage: 18W/ 36W/ 44W
- Dimensions: 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm
- Style: Batten Lights
- Decor Style: Modern
- Features: Indoor or Outdoor, Dimmable Sensor, Emergency Function
- Description
- Additional information
- Inquiry
Description
A Dust Proof LED Batten Lamp is a sealed linear luminaire engineered to keep dust, moisture and mechanical stress away from sensitive LED modules and drivers. Think of it as a protective sleeve for high-performance light — the internal electronics stay clean and cool while the external shell takes the hits. This class of product is also commonly specified under the “tri-proof” concept (dustproof, waterproof, impact-resistant) and is preferred in environments where reliability and low maintenance are priorities: tunnels, underground parking, warehouses, transit platforms and evacuation routes.
Beyond the label, buyers focus on measurable characteristics: ingress and impact ratings, optical transmittance, driver and terminal robustness, emergency capability and a small set of standard wattages to simplify procurement and spares. The design trades that matter most are serviceability (tool-free cap or clip access), wiring speed on site, and a battery/emergency system that meets code-driven egress requirements without complex retrofits.
Dust Proof LED Batten Lamp basic features
Durability & Protection
- UV-Resistant Design:The anti-UV milky PC diffuser and PC base are engineered to resist yellowing over time, maintaining a clean and attractive appearance even under prolonged exposure to sunlight.
- Weatherproof & Impact-Resistant:Featuring an IP65 weatherproof rating and IK10 high impact resistance, this light can withstand extreme weather conditions and physical stress. A silicone seal further enhances its ability to resist moisture and dust, making it ideal for outdoor and harsh environments.
- High Diffusion Rate:The milky cover has a light transmission rate of up to 88%, and its striped design ensures even and soft lighting across the area. This reduces harsh shadows and creates a comfortable and well-lit environment.
- Easy Mounting and Installation:The light comes with extended mounting slots for stainless steel clips, offering flexibility during installation. The PC knob securely holds the gear tray in place, ensuring easy setup. Additionally, the base with hooker allows for easy handling during installation, while also preventing the gear tray from falling during maintenance for added safety.
- Robust Construction:A 0.5mm thick iron tray with white paint provides a durable structure with high reflectivity, ensuring intense lighting efficiency.
Enhanced Lighting Efficiency
- Advanced LED Technology:Equipped with high-brightness 200lm/W SMD2835 LED chips, certified by LM-80 for low light degradation, the fixture offers over 120lm/W efficiency. Its color rendering index (RA >83) ensures vibrant, true-to-life lighting.
- Customised PCB Design:The fixture uses a 1.6mm thick FR4 PCB with 35mil thick copper, which enhances heat dissipation and overall efficiency.
- Simplified Maintenance:The SMD twin-hole connectors allow for easy plug-and-play installation, eliminating the need for soldering and making maintenance more straightforward. The symmetrical light strip design ensures hassle-free replacement without the concern for orientation.
- Temperature-Resistant Components:High-temperature-resistant white nylon rivets can withstand temperatures up to 185°C, ensuring the longevity and safety of the light even in extreme conditions.
- Reliable Wiring:The fixture features a wiring method with parallel connections, reducing the risk of total failure if a single LED chip fails. All wiring uses >0.8mm² UL-approved high-temperature wires with 100% copper conductors for superior conductivity and durability.
Power & Efficiency
- High-Power Driver:The IEC-certified 60W DC constant current isolated driver features a high power factor of >0.9 and provides ample margin for a long lifespan. The clip-on installation, half-power DIP switch, and plug-and-play connectors make replacement and maintenance straightforward.
- Emergency Functionality:The light is equipped with a high-temperature-resistant, large-capacity lithium battery designed specifically for emergency lighting, providing over 3 hours of backup. A battery compartment with plug-and-play terminals ensures easy battery replacement when necessary.
- Microwave Motion Sensor:Featuring a highly sensitive 5.8 GHz HF microwave sensor, the fixture offers adjustable parameters for brightness, time, and distance. This enhances energy efficiency by automatically adjusting the lighting based on motion, ensuring optimal performance while reducing energy consumption.
- Emergency Status & Testing:The light includes an external high-brightness emergency status indicator and a test button, making it easy to monitor and test the fixture during maintenance.
Versatile Installation & Accessories
- Linkable Installation:The fixture supports linkable installation, allowing for a seamless connection between multiple lights without additional wiring. This feature simplifies large-scale installations.
- High-Quality Mounting Clips:The light comes with 304 stainless steel mounting clips for surface mounting and nickel-plated stainless steel screws, ensuring a secure installation in both indoor and outdoor settings. It also includes an IP65 weatherproof plug to block off pre-cut wire outlets when wiring exits from the back.
- Retail-Ready Packaging:The light is individually packaged in cardboard, protected by a PP environmental bag to prevent dust and scratches. For bulk orders, a large double-corrugated cardboard box is used for up to 9 units, making it suitable for retail and wholesale distribution.
Dust Proof LED Batten Lamps Main advantages
Dust Proof LED Batten Lamps offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
Dust Proof LED Batten Lamp Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About Dust Proof LED Batten Lamp, Guess you’re asking:
1. What is the luminous efficacy of Dust Proof LED Batten Lamp ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the Dust Proof LED Batten Lamp?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the Dust Proof LED Batten Lamp?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the Dust Proof LED Batten Lamp use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of Dust Proof LED Batten Lamp?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the Dust Proof LED Batten Lamp?
The Dust Proof LED Batten Lamp comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the Dust Proof LED Batten Lamp wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the Dust Proof LED Batten Lamp have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of Dust Proof LED Batten Lamp?
Dust Proof LED Batten Lamp with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This Dust Proof LED Batten Lamp is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of Dust Proof LED Batten Lamps for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our Dust Proof LED Batten Lamps are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Dust Proof LED Batten Lamp size dimension:
Packing Specification:
Installation methods:
Conclusion
The Dust Proof LED Batten Lamp is a purpose built, industrial grade linear luminaire that balances photometric performance, robust protection and installation efficiency. With SMD2835 LEDs, three practical wattages (18/36/44W), a high transmittance milky diffuser, heavy duty clips and a >3 hour LiFePO4 emergency option it’s designed to reduce maintenance, simplify procurement and deliver predictable lifetime cost for tunnels, parking, rail, warehouses and other demanding environments.
Related Questions and Answers:
How does the Dust Proof LED Batten Lamp perform in long tunnel and parking applications?
The kind of environments that see big amounts of use like tunnels and underground parking areas get judged based on how well a light holds up. Lumen maintenance, dust and water resistance, and a battery back-up for emergencies are all important factors. This batten lamp is built with SMD2835 LEDs that give off a fair amount of light per watt – 110-140 lm/W to be exact – and its L70@Ta25°C = 54,000 hours rating means that over time it will still give off at least 70% of its initial brightness. It’s also got an IP65 rating meaning it’s dustproof and can withstand water jets. And then there’s the IK08 rating which shows it can handle a bit of physical punishment from tools or debris – all these specs together help prevent things breaking down and needing a hasty replacement which can be a real problem for big operations like that.
What wiring and installation details reduce on-site time for large orders of the Dust Proof LED Batten Lamp?
This light has been designed to be as easy as possible to install; the clip fixed driver lets you swap out the power unit or do some servicing without even taking the whole thing down; then there’s the 5.0 mm push-in terminal which makes it easy to connect up the wires and the options for installing either on the surface or on the wall mean you don’t need a load of extra hardware lying around. When you’re dealing with a big order, its worth grouping the fixtures by wattage and CCT so you can keep your spares to a minimum and make life a bit easier for the installers- just have the wiring diagrams printed out already and make sure you have the fixtures preconfigured to the customers needs (on/off, 0–10V, sensor-integrated) to avoid having to swap drivers on site.
Is the Dust Proof LED Batten Lamp a energy-efficient and controllable option for corridors and storage aisles?
It’s actually quite energy efficient. This is thanks to the LED’s ability to produce between 110-140 lumens per watt of energy which is pretty impressive. On top of that, you can control the amount of energy it uses with a sensor or dimmer switch. For example, if you go for a microwave sensor dimmer that can reduce the light to as little as 20% of its maximum output and then switch to full off when no one’s around – that’s going to really help keep energy usage down. Plus, it’s just as efficient in terms of using the mains too, with a power factor of over 0.9 and compatibility for 200-240 volts. And if you want to squeeze out even more savings then grouping the lights in zones and having them switch off as soon as there’s no one around in the area is a good idea.
Can I standardise across multiple sites while keeping risk low when ordering this Dust Proof LED Batten Lamp?
Yes — standardisation is one of the product’s strengths. Use a single CCT and wattage family per site type (e.g. 4000K / 36W for general circulation; 5000K / 44W for high bay task zones) to simplify spares and reduce stocking complexity. The robust mechanical design (IP65, IK08; stainless clips) and consistent connector format (5.0 mm terminal) allows the same fixture to be used across tunnels, parking and warehouse areas while minimising unique SKUs. For procurement teams ask the manufacturer for a volume order plan that includes spare batteries and an optional sensor/driver pre-configuration service to reduce on site changes.
Additional information
| Model | ZL-PSBLP18-2FT(SMD)/ ZL-PSBLP36-4FT(SMD)/ ZL-PSBLP44-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
