Industrial Waterproof Tri Proof Light Fixture, Led Emergency Batten Light
This Industrial Waterproof Tri Proof Light Fixture adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
- Description
- Additional information
- Inquiry
Description
What is Industrial Waterproof Tri Proof Light Fixture?
Industrial Waterproof Tri Proof Light Fixture refers to a kind of lighting fixture designed for the most hostile industrial environments. Its “tri-proof” features are waterproof, dustproof, and corrosion-resistant. The lamps have a high IP rating, usually IP65 or IP66, which contributes much to help effectively resist moisture, dust, and chemical intrusion for stable operation in humid, dusty, or corrosive environments.
The light fixture casing is manufactured from corrosion-resistant materials like polycarbonate and stainless steel. These lamps are resistant to mechanical vibration, chemical erosion, and extreme weather conditions at industrial sites. The application of LED technology helps ensure high energy efficiency and long service life, greatly reducing energy consumption and maintenance costs. Waterproof tri-proof lamps are especially suitable in places like factory workshops, warehouses, chemical plants, metallurgical plants, and places with similar environments where reliable lighting under harsh conditions is required. Provide efficient and long-lasting lighting solutions. With these properties, the industrial waterproof tri-proof lamps will be an optimal solution to guarantee industrial safety and improve work efficiency.
Industrial Waterproof Tri Proof Light Fixture basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK10-Rated Seal: Silicone gasket and IK10-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
Industrial Waterproof Tri Proof Light Fixtures Main advantages
Industrial Waterproof Tri Proof Light Fixtures offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
Industrial Waterproof Tri Proof Light Fixture Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About Industrial Waterproof Tri Proof Light Fixture, Guess you’re asking:
1. What is the luminous efficacy of Industrial Waterproof Tri Proof Light Fixture ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the Industrial Waterproof Tri Proof Light Fixture?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the Industrial Waterproof Tri Proof Light Fixture?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the Industrial Waterproof Tri Proof Light Fixture use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of Industrial Waterproof Tri Proof Light Fixture?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the Industrial Waterproof Tri Proof Light Fixture?
The Industrial Waterproof Tri Proof Light Fixture comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the Industrial Waterproof Tri Proof Light Fixture wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the Industrial Waterproof Tri Proof Light Fixture have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of Industrial Waterproof Tri Proof Light Fixture?
Industrial Waterproof Tri Proof Light Fixture with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This Industrial Waterproof Tri Proof Light Fixture is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of Industrial Waterproof Tri Proof Light Fixtures for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our Industrial Waterproof Tri Proof Light Fixtures are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Industrial Waterproof Tri Proof Light Fixture size dimension:
Packing Specification:
Installation methods:
Conclusion
The Industrial Waterproof Tri-Proof Light Fixture is high-performance LED technology in a tough, weather-resistant body. Its tough design and LED technology means it performs in tough environments, reliability, safety and energy efficiency. It beats expectations for durability and performance so it’s a must have in any industrial setting.
Related Questions and Answers:
What makes the Industrial Waterproof Tri-Proof Light Fixture industrial?
The Industrial Waterproof Tri-Proof Light Fixture is designed to thrive in harsh industrial environments with its three-proof design: dust-proof, water-proof and impact-resistant. The tough build means it can withstand dust, moisture and physical impacts so it’s perfect for factories, warehouses and other tough environments. Plus the LED technology gives bright, reliable light and is energy efficient and long lasting.
How does the LED Emergency Batten Light work?
The LED Emergency Batten Light is for visibility during power outages. In the event of a power failure this feature kicks in and the area is lit and safe for workers. This is especially important in industrial environments where loss of lighting can cause accidents or disrupt operations. The emergency function adds an extra layer of safety by keeping essential areas lit.
What’s the energy saving benefit?
The Industrial Waterproof Tri-Proof Light Fixture uses LED technology which is known for its energy efficiency compared to traditional lighting. LEDs use less power to produce the same or more light. This means lower energy bills and reduced environmental impact. Plus LEDs have a longer life so less replacements and maintenance costs.
What maintenance does the Industrial Waterproof Tri-Proof Light Fixture need?
The maintenance of the Industrial Waterproof Tri-Proof Light Fixture is minimal. Just clean dust and debris regularly and it will perform optimally. Also check the fixture periodically for any signs of damage or wear especially in high impact areas. Regular inspections will ensure the fixture continues to work and be safe.
How does the fixture handle extreme temperatures?
The fixture is designed to work in a wide temperature range. The tough build and quality materials means it will work in extreme heat or cold. This is important for industrial environments where temperature can be extreme, so the fixture will keep lighting consistent regardless of the outside conditions.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 280*116*92mm/ 1580*116*92mm |
