IP66 Tri-proof Led Batten Light, 4ft Triproof Fitting
This IP66 Tri-proof Led Batten Light adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
- Description
- Additional information
- Inquiry
Description
What is IP66 Tri-proof Led Batten Light?
IP66 Tri-proof LED batten light is a LED tri-proof light with complete dust and water resistance. In addition to its anti-corrosion and impact resistance, its most prominent advantage is its high IP66 protection level.
IP66 rating allows the lamp to completely prevent dust from entering and withstand strong water flow impact. It has better protection performance than IP65, allowing it to work normally in a long-term humid, rainy or frequently cleaned environment.
The lamp is made of corrosion-resistant materials such as polycarbonate and stainless steel bracket, which is durable and has tri-proof characteristics.
It is very suitable for outdoor passages and streets exposed to rain and dust, and for lighting the exterior walls of buildings. The strip design is also conducive to the coordination and beauty of the building. And normal operation in industrial humid, dusty and chemical gas environments.
IP66 Tri-proof Led Batten Light basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK10-Rated Seal: Silicone gasket and IK10-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
IP66 Tri-proof Led Batten Lights Main advantages
IP66 Tri-proof Led Batten Lights offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
IP66 Tri-proof Led Batten Light Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About IP66 Tri-proof Led Batten Light, Guess you’re asking:
1. What is the luminous efficacy of IP66 Tri-proof Led Batten Light ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the IP66 Tri-proof Led Batten Light?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the IP66 Tri-proof Led Batten Light?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the IP66 Tri-proof Led Batten Light use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of IP66 Tri-proof Led Batten Light?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the IP66 Tri-proof Led Batten Light?
The IP66 Tri-proof Led Batten Light comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the IP66 Tri-proof Led Batten Light wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the IP66 Tri-proof Led Batten Light have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of IP66 Tri-proof Led Batten Light?
IP66 Tri-proof Led Batten Light with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This IP66 Tri-proof Led Batten Light is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of IP66 Tri-proof Led Batten Lights for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our IP66 Tri-proof Led Batten Lights are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
IP66 Tri-proof Led Batten Light size dimension:
Packing Specification:
Installation methods:
Conclusion
IP66 Tri-proof LED Batten Light is durable and perform well in harsh environment. The design not only provide lighting but also protect against moisture and dust infiltration. Suitable for various applications, increase visibility and safety in industrial and commercial area.
Related Questions and Answers:
Why IP66 Tri-proof LED Batten Light suitable for harsh environment?
IP66 of Tri-proof LED Batten Light means it can withstand dust and powerful water jets, suitable for areas where dust and water exposure is frequent. The sealed and high impact resistant housing prevent dust and water from entering, the materials are durable against physical impact and vibration. This rugged design ensures the light still function and reliable even in extreme condition.
Can be used outdoor?
Yes, IP66 Tri-proof LED Batten Light is designed for indoor and outdoor use. The high level of protection against water and dust makes it suitable for outdoor area where weather exposure is a concern. Used in areas such as parking lot, loading dock and outdoor storage, provide lighting in various weather condition.
What are the installation requirements for the IP66 Tri-proof LED Batten Light?
Installation is simple and adaptable to different mounting options. Can be surface mounted or suspended depending on the site requirements. The light is designed to be compatible with standard electrical connections, mounting brackets and hardware are included for secure and stable installation.
How IP66 Tri-proof LED Batten Light contribute to safety in industrial area?
In industrial area, proper lighting is key to safety and productivity. IP66 Tri-proof LED Batten Light provide bright and uniform light, reduce shadows and dark spot, increase visibility and reduce accident risk. Durable to withstand challenging condition, ensure the light still function and reliable, contribute to a safer working environment by providing consistent and reliable lighting.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
