LED Tri-proof Batten Light Fixture, Batten LED Weatherproof
This LED Tri-proof Batten Light Fixture adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
- Description
- Additional information
- Inquiry
Description
What is LED Tri-proof Batten Light Fixture?
LED Tri-Proof batten light fixture is one of Tri-Proof Lights. It adopts advanced LED lighting technology. It has smooth strip appearance. The fixture is durable. It is waterproof dustproof and corrosion-resistant. Commonly, it is used in industrial settings. It is suitable for warehouses workshops and other locations exposed to moisture, dust or corrosive elements. This fixture is durable, reliable and energy-saving.
LED Tri-proof Batten Light Fixture basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK10-Rated Seal: Silicone gasket and IK10-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
LED Tri-proof Batten Light Fixtures Main advantages
LED Tri-proof Batten Light Fixtures offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
LED Tri-proof Batten Light Fixture Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About LED Tri-proof Batten Light Fixture, Guess you’re asking:
1. What is the luminous efficacy of LED Tri-proof Batten Light Fixture ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the LED Tri-proof Batten Light Fixture?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the LED Tri-proof Batten Light Fixture?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the LED Tri-proof Batten Light Fixture use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of LED Tri-proof Batten Light Fixture?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the LED Tri-proof Batten Light Fixture?
The LED Tri-proof Batten Light Fixture comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the LED Tri-proof Batten Light Fixture wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the LED Tri-proof Batten Light Fixture have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of LED Tri-proof Batten Light Fixture?
LED Tri-proof Batten Light Fixture with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This LED Tri-proof Batten Light Fixture is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of LED Tri-proof Batten Light Fixtures for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our LED Tri-proof Batten Light Fixtures are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
LED Tri-proof Batten Light Fixture size dimension:
Packing Specification:
Installation methods:
Conclusion
This LED Tri-proof Batten Light Fixture is tough and efficient. Tri-proof means it’s good for industrial and outdoor use where durability and high performance matters. By combining LED with a weatherproof design, this fixture gives you better lighting and energy savings. Perfect for visibility and safety in harsh environments.
Related Questions and Answers:
Why is the LED Tri-proof Batten Light Fixture good for harsh conditions?
This LED Tri-proof Batten Light Fixture is designed to work in areas with moisture, dust and extreme temperatures. Tri-proof means fully sealed housing that prevents water and dust ingress and a robust construction that can withstand impact. So the fixture will still work and perform well in harsh conditions, perfect for industrial, warehouse and outdoor use.
Is the LED Tri-proof Batten Light Fixture outdoor use?
Yes, the LED Tri-proof Batten Light Fixture can be installed outdoor. Its weatherproof design can withstand rain, snow and extreme temperatures. Perfect for outdoor use such as parking lots, loading docks and other areas where lighting is critical despite the environment.
What are the advantages of this fixture over traditional lighting?
Compared to traditional lighting, the LED Tri-proof Batten Light Fixture has several advantages. First, energy efficiency means lower electricity bills and reduced carbon footprint. Second, its durability and tri-proof design means long term reliability and lower maintenance as it’s less prone to damage from external factors. Third, high quality LED light output means better visibility and safety in work areas, means better operational efficiency.
Is the installation of the LED Tri-proof Batten Light Fixture complicated?
Installation of the LED Tri-proof Batten Light Fixture is easy and user friendly. The fixture comes with installation instructions and mounting hardware.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
