COMLED Lighting Ceiling Mount LED Vapor Tight
LED Vapor Tight, IP65 IK08, Sensor dimming, Emergency Function, Wall or Ceiling Surface-Mounted Fitting. CE, SAA, LCP, ISTMT and TM21 certified. Vapor-Tight LED Batten Fixture
- Finish Color : Milky(White) + Gray
- Mount Type: Suspension mounted, Wall or Ceiling Surface-Mounted
- Light Bulb Type: LED
- Category: Hanging Lights, Emergency & Exit Lights, Waterproof Lights
- Brightness: 2000 – 6000 lumens
- Shade Material: Polycarbonate (PC)
- Light Fixtue Wattage: 18W/ 36W/ 44W
- Dimensions: 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm
- Style: Batten Lights
- Decor Style: Modern
- Features: Indoor or Outdoor, Dimmable Sensor, Emergency Function
- Description
- Additional information
- Inquiry
Description
LED Vapor Tight, Polycarbonate Milky Diffuser, Wall or Ceiling Surface-Mounted Fitting, AC110 or AC230V, 50/60Hz, LED Wraparound Light
This vapor tight luminaire adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
LED Vapor Tight basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK10-Rated Seal: Silicone gasket and IK10-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
LED Vapor Tights Main advantages
LED Vapor Tights offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
LED Vapor Tight Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About LED Vapor Tight, Guess you’re asking:
1. What is the luminous efficacy of LED Vapor Tight ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the LED Vapor Tight?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the LED Vapor Tight?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the LED Vapor Tight use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of LED Vapor Tight?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the LED Vapor Tight?
The LED Vapor Tight comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the LED Vapor Tight wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the LED Vapor Tight have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of LED Vapor Tight?
LED Vapor Tight with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This LED Vapor Tight is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of LED Vapor Tights for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our LED Vapor Tights are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
LED Vapor Tight size dimension:
Packing Specification:
Installation methods:
Our Competitive Advantages:
1. ODM/OEM services available; samples provided; customization options for brand and function.
2. COMLED Technology is a leading provider of emergency LED Vapor Tighting solutions, with a decade of expertise in designing, manufacturing, and selling LED Vapor Tights.
3. Factory area: 2,000 m²; Production capacity: 30,000 units per month.
4. All LED fixtures undergo rigorous quality control.
5. Our LED Vapor Tights are certified CE, SAA, LCP, ISTMT, and TM21, and meet regional electrical codes and safety standards.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Guess you’re asking:
1. What is the luminous efficacy of LED Vapor Tight ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the LED Vapor Tight?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the LED Vapor Tight?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the LED Vapor Tight use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of LED Vapor Tight?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the LED Vapor Tight?
The LED Vapor Tight comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the LED Vapor Tight wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the LED Vapor Tight have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of LED Vapor Tight?
LED Vapor Tight with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
About LED Vapor Tight
LED Vapor Tight fixtures are sealed ceiling-mount or wall-mount luminaires designed to thrive in tough spaces – from underground parking decks to damp tunnels. With an IP65 rating against dust and water jets and IK10 impact resistance, these units protect their internal components like a submarine hull protects its crew. A high-transmittance polycarbonate milky diffuser (≈86% light gain) spreads soft, uniform light, minimizes glare and hotspots.
Global installations are easy with each LED Vapor Tight working on AC 110V or AC 230V at 50/60Hz. The core lighting engine delivers 118-140lm/W, plenty of punch with energy savings – equivalent to replacing one fluorescent tube with half the power draw. With an expected life of 54,000 hours (L70 @ 25°C) and a 120° beam angle, you get years of steady light and broad coverage, fewer maintenance cycles and downtime.
Beyond steady light, optional microwave sensor dimming (100% → 20% → OFF) automatically adjusts to occupancy, slashing energy use in low-traffic areas. Settings for hold-time and daylight threshold are adjustable via onboard DIP switches – no extra programming required. Emergency versions have a 3000mAh LiFePO4 battery, providing over 3 hours of backup at 3.6W, so your site stays safe when power fails.
Conclusion
COMLED’s LED Vapor Tight series combines resilience, efficiency and smart controls in one versatile package. With sensor dimming, emergency backup and multiple mounting options, it fits industrial and commercial projects. Factory discounts, bulk orders and easy installation unlock more value—so specifiers and installers can light demanding spaces with confidence.
FAQs:
How customizable is the LED Vapor Tight’s sensor dimming?
You can adjust the HF detector via onboard DIP switches to set hold times (5s to 30min) and daylight thresholds (10-50lux). Stepped dimming modes (100%→20%→OFF) are perfect for areas with intermittent traffic—like service corridors—so you can balance safety and savings.
What installation options are available for the LED Vapor Tight fixture?
Beyond standard ceiling or wall mounting, you can choose pendant kits for suspended runs or linkable connectors to create continuous rows. The push-in 5.0mm² terminal block can accommodate multiple conductors, so you can wire large areas faster and save labor costs.
How does the emergency backup work in LED Vapor Tight units?
In emergency versions, a LiFePO₄ pack (3,000mAh) slides into the fixture. When the power goes out, the driver automatically switches to battery power and runs for 3+ hours at low power (3.6W). An integrated auto-test and status indicator makes compliance checks a breeze.
Why choose LED Vapor Tight over traditional fluorescent fixtures?
Compared to fluorescents, this LED wraparound offers up to 50% energy savings, a longer life (L70 ≥ 54,000hrs), instant start in cold temps and no mercury disposal worries. The rugged seal and easy driver swaps reduce maintenance overhead.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
