Garage Vapor Proof LED Fixture, LED Ceiling Batten Light Fitting

Description

Garage Vapor Proof LED Fixture, High Transmittance, Emergency Battery Backup, Sensor Dimming Function, CE SAA and C-Tick Certificate

This led smart batten luminaire adopts Stainless steel base and milky PC diffuser housing, integrated the lastest SMD LED technology to achieve higher lumen output and protection rating. It is available in 2FT/4FT/5FT with standard, sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.

 

Features of Garage Vapor Proof LED Fixture:

Model: ZL-NSBLP18-2FT/ZL-NSBLP36-4FT/ZL-NSBLP44-5FT
Size: 2FT/4FT/5FT
Rated Power: 18W/36W/44W
Input power Supply: AC200-240V, 50/60Hz
LED Chips: SMD2835
CCT: 3000K/4000K/5000K/6000K
CRI >80
Luminous Efficacy: 110-140LM/W
Emergency Function(option)
Sensor dimming (option)
Approved by CE SAA and C-Tick (RCM)
Package Dimensions: 646*116*96mm/1256*116*96mm/1556*116*96mm

 

Garage Vapor Proof LED Fixture Features Specs

Safety and Durable	High Transmission	Easy Installation
Sensor Dimming Function(option)	Emergency fuction module (option)	High Brightness LED Chips
IP20 Waterproof Rating	Linkable Connection Wiring(option)	Surface Mount
Wall Mount	Energy Saving

 

 

Features:

Stainless steel base and PC diffuser IP20 Rated.
High transmittance(88%) PC diffuser.
High Brightness SMD2835 LED chip as light source (approval by LM80).
Huge terminal block for easy wiring.
Side patented fixing structural design, easy for on site installation.
Split type power supply design, easy maintenance without switch power off on site.
Clip-fixed Driver for easy replacement and maintenance.
5.8G HF Sensor dimming function (option).
Emergency function with self-test, quick battery maintenance(option).
Approved by CE SAA and C-Tick.
Surface mounted or hanging installation options.

 

PARAMETER DATA

Model	Input voltage	Watt	Sensor Dimming standby	Emergency
ZL-NSBLP20-2FT-CN	AC110V or 230V	18w	x	x
ZL-NSBLP40-4FT-CN	AC110V or 230V	36w	x	x
ZL-NSBLP60-5FT-CN	AC110V or 230V	44w	x	x
ZL-NSBLP20-2FT-CS	AC110V or 230V	18w	100% / 20% /OFF	x
ZL-NSBLP40-4FT-CS	AC110V or 230V	36w	100% / 20% /OFF	x
ZL-NSBLP60-5FT-CS	AC110V or 230V	44w	100% / 20% /OFF	x
ZL-NSBLP20-2FT-CE	AC110V or 230V	18w	x	>[email protected]
ZL-NSBLP40-4FT-CE	AC110V or 230V	36w	x	>[email protected]
ZL-NSBLP60-5FT-CE	AC110V or 230V	44w	x	>[email protected]
ZL-NSBLP20-2FT-CES	AC110V or 230V	18w	100% / 20% /OFF	>[email protected]
ZL-NSBLP40-4FT-CES	AC110V or 230V	36w	100% / 20% /OFF	>[email protected]
ZL-NSBLP60-5FT-CES	AC110V or 230V	44w	100% / 20% /OFF	>[email protected]
Note:  x –No this function

 

Garage Vapor Proof LED Fixture Application

 

Garage Vapor Proof LED Fixture for indoor or outdoor use:

These LED batten lights are universal for all environments, from tunnels and train or subway stations to supermarkets, stairwells, corridors, evacuation routes, parking lots, ship electrical rooms and all underground areas. They are tough and efficient to provide better visibility and safety in these areas.

LED batten lights are also for tunnels and transportation hubs, they provide clear and shadow free lighting to aid traffic and for people to see their surroundings. They create a welcoming atmosphere in supermarkets and commercial areas by lighting up all the aisles and checkout areas. And also for emergency use areas like evacuation routes and stairways to ensure residents’ safety.

They are perfect for parking lots and outdoor areas, weatherproof to be durable and perform. And in areas like electrical rooms and basements, LED batten lights lights up maintenance and operational tasks. Overall they are efficient and versatile for many applications.

 

Size Dimension(unit: mm):

Garage Vapor Proof LED Fixture Installation option

Ceiling Mount

Wall Mount with Linkable

 

Main Export Markets

US, Europe, The Middle East, Asia

 

Competitive Advantages of LED Batten Light Fixture Manufacturers

1.Samples/ODM/OEM and customized requirements are available.
2.COMLED Technology is a professional led batten light product and solution provider, dedicated in design, produce and sale led tri proof light for ten years.
3.Factory Region: 2,000 m², Capacity: above 30,000 pieces a month.
4.Each led surface fixture must be under strictly quality controlled and aging tested.

 

About Garage Vapor Proof LED Fixture

Designed to thrive in environments where moisture, dust and accidental impacts can damage ordinary luminaires. Fully sealed, gasketed housing with IP65/IK10 rating keeps water jets, steam and particulates out. Inside, high efficacy LED modules (110–140 lm/W) through a frosted diffuser, gives even, shadow free light across workshop floors, parking bays or basement storage areas.

Beyond its tough shell, this fixture is versatile. Choose from 18W, 36W or 44W models to match ceiling height and desired brightness – 2,000lm to 6,000lm per unit. Colour temperatures from 3000K to 6000K so mechanics can fine tune for task work or facility managers can keep the same lighting across large areas. Quick installation – surface mount brackets to ceiling or wall and a large terminal block for easy wiring for bulk deployments.

Engineered for longevity – 54,000 hours (L70 @ 25°C) so fewer replacement cycles and service calls. Optional sensor dimming (100%–20%–OFF) and emergency backup (3h @ 3.6W) for energy saving protocols or safety regulations. Whether upgrading an old garage or specifying a new build, this LED solution gives performance, durability and cost effectiveness without compromise.

 

Conclusion

When you need reliable, high quality lighting in damp or dusty areas, the Garage Vapor Proof LED Fixture is the one. Its combination of tough protection, adjustable output and long life makes it a smart choice for contractors, facility managers and OEM buyers. Contact us today for volume pricing, custom wattage/CCT or project specific engineering support – turnkey lighting solutions direct from our factory to your site.

 

Related Questions and Answers:

1. How does the Garage Vapor Proof LED Fixture maintain brightness in wet or dusty garages?

The fixture’s IP65/IK10 rated housing uses silicone gaskets and corrosion resistant clips to seal the LED module and driver chamber. This barrier prevents moisture and dust from entering and accumulating, so the lumen output (110-140lm/W efficacy) remains stable throughout its 54,000 hour life, even under steam cleaning or oil filled atmospheres.

2. Can I add dimming or emergency functions without replacing the fixture?

Yes. Sensor dimming versions have a built in 5.8GHz microwave sensor, adjustable to 100%, 20% and OFF modes. For emergency readiness, select the version with a 3000mAh LiFePO4 battery, which provides over 3 hours at 3.6W output during power loss. Both options are factory installed and plug and play with the same wiring layout.

3. What factors determine the right wattage and CCT for a multi bay parking garage?

• Ceiling height: Low ceilings (≤3m) use 18-36W at 3000-4000K for balanced glare control.
• Ambient tasks: Vehicle maintenance areas use 5000-6000K cool white at 44W for color accuracy.
• Spacing: Mount 1.5x the height of the fixture between fixtures to achieve 200-300lux uniformity across driving lanes.

4. How do I get cost savings and customization when ordering in bulk?

Bulk orders allow for streamlined production runs with custom configurations – whether that’s mixed CCT palettes, preconfigured dimming settings or branding on the housing. Volume orders also qualify for tiered discounts and priority lead times, reducing both per unit cost and project turnaround.

5. What maintenance practices extend the life of these fixtures?

Clean the diffuser with a damp cloth to remove surface grime without compromising the seal. Every 12-18 months inspect the gasket and clip tension. With the click fixed driver and accessible terminal block, replacing the driver or battery (in emergency versions) can be done in under 5 minutes, minimizing downtime.

Additional information

Model	ZL-NSBLP20-2FT/ZL-NSBLP40-4FT/ZL-NSBLP60-5FT
Rated Power	18W/36W/44W
Install	Surface Mount/Suspended/Linkable
Protection Rating	IP20
Housing	Steel with Coating
Optics	Polycarbonate Milky Diffuser
Connection Type	Terminal Block or Linkable
Operating Temperature	-20℃ to 40℃(Emergency version: 0℃ to 40℃)
Warranty	5 Years(battery for 1 year)
Dimming(Option)	Microwave Sensor – 3 Stepped Version(100%-20%-OFF)
Emergency(Option)	3 Hours+ @3.6W LiFePO4 Battery
Luminous Efficacy	110-140lm/w
LED Chips	SMD2835
CCT	3000K/4000K/5000K/6000K
CRI	>80
Beam Angle	120 degree
Input power Supply	AC200-240V, 50/60Hz
Power Factor	0.9
Lifespan@Ta25°(L70)	54,000 hours
Package Dimensions	646*116*96mm/1256*116*96mm/1556*116*96mm