Tunnel Vapor Tight Light
- Finish Color : Milky(White) + Gray
- Mount Type: Suspension mounted, Wall or Ceiling Surface-Mounted
- Light Bulb Type: LED
- Category: Hanging Lights, Emergency & Exit Lights, Waterproof Lights
- Brightness: 2000 – 6000 lumens
- Shade Material: Polycarbonate (PC)
- Light Fixtue Wattage: 18W/ 36W/ 44W
- Dimensions: 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm
- Style: Batten Lights
- Decor Style: Modern
- Features: Indoor or Outdoor, Dimmable Sensor, Emergency Function
- Description
- Additional information
- Inquiry
Description
Tunnel Vapor Tight LED Light, IP65 Corrosion-Resistant Finish, Vibration-Proof Structure, Rapid Driver Replacement, Continuous Zone Illumination Without Dark Spots
When safety and durability matter the Tunnel Vapor Tight Light stands out. Built for underground corridors, subway stations and parking decks, its IP65 rated, corrosion resistant housing and IK10 impact protection will withstand dust, water jets and accidental knocks. Inside, vibration damping mounts cradle the LEDs to keep the light steady even with constant rumble and movement. The high transmittance (≈86%) polycarbonate diffuser spreads smooth, comfortable light – no hot spots, no blind corners.
Installation and maintenance has been made easy from the ground up. Snap on stainless steel or polycarbonate clips to release the diffuser in seconds, the tool-free driver tray slides out for swap-in replacements – no power shutdown required. A spacious terminal block can accept conductors up to 5mm² and modular linkable connectors allow you to daisy chain fixtures into seamless rows, so you can have continuous lighting without visible joints.
Tunnel Vapor Tight Light basic features
Durability & Protection
- UV-Stable PC Housing: Made from high-grade, UV-resistant polycarbonate (PC) base and diffuser, this batten lamp won’t yellow or warp over years of use even in direct sunlight.
- IP65 & IK10-Rated Seal: Silicone gasket and IK10-rated enclosure for dust- and water-tight performance and heavy impact and weather resistance.
- 86 % Light Transmission: Milky PC diffuser with 86 % transmittance and anti-glare strip pattern for uniform, soft light with minimal shadows.
- Snap-On Mounting System: Stainless steel clip slots and PC end-cap knob for tool-free installation. Hook-style base holds LED tray in place during wiring and maintenance.
-
Rigid Steel Backplate: 0.5 mm cold-rolled steel tray, white finished for high reflectivity.
Enhanced Lighting Efficiency
- 220 lm/W SMD2835 LED Array: LM-80 certified SMD2835 chips for up to 220 lm/W. High CRI (> 80) for vibrant and accurate colors.
- FR4 PCB: 1.6 mm FR4 board with 35 mil copper traces for heat dissipation and electrical reliability.
- Tool-Free Service: Twin-hole SMD connectors for plug-and-play module swaps – no soldering required. Reversible light tray for correct orientation every time.
- High-Temperature Fasteners: White nylon rivets rated to 185 °C for extreme thermal stress.
- Parallel-Wired LEDs: Each LED channel runs in parallel with > 0.8 mm² UL-approved copper conductors so a single diode fault won’t darken the whole strip.
Power & Efficiency
- 60 W Constant-Current Driver: IEC certified, isolated DC driver with power factor > 0.9. Clip-on installation and internal DIP switch for half-power operation for energy savings.
- 3 Hr Emergency Backup: 3000 mAh LiFePO₄ battery for 3 + hours at 3.6 W output. Dedicated compartment and plug-and-play terminals for battery swaps.
- 5.8 GHz Microwave Sensor: Adjustable settings for brightness, hold-time and detection range for dimming or switching off when spaces are unoccupied.
- Status Indicator & Test Switch: High-contrast LED indicator and test button for on-site emergency system verification.
Versatile Installation & Accessories
- Linkable Connectivity: Push-in link ports for daisy-chaining up to 9 fixtures without extra wiring – perfect for tunnels or continuous aisles.
- Premium Clips & Hardware: 304-grade stainless steel mounting clips and nickel-plated screws for secure attachment. IP65-rated knockout plug for unused inlet.
- Protective Retail Packaging: Each lamp in a PP dust-proof sleeve, then in single-unit cartons. Bulk orders in double-corrugated cartons holding up to 9 units – ideal for project kits or warehouse stock.
Tunnel Vapor Tight Lights Main advantages
Tunnel Vapor Tight Lights offer the following key benefits over other types of lighting:
1. Quick and easy maintenance replacement
| A. The power supply is snap-on;
|
B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
|
| C. The center panel is secured with aircraft fasteners;
|
D. Output inputs use plug-in terminals (many parts are plug-in);
|
| E. Body with quick buckles
|
F. Huge terminal block for holding multiple wires
|
2. The battery adopts LiFePO4, high temperature resistance, not easy to catch fire, safer and more durable;
3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;
4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;
5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;
6. High protection level (IP65 IK10), waterproof, dustproof and impact resistance.
Tunnel Vapor Tight Light Parameter data of various specifications
| Model | Input voltage | Watt | Sensor Dimming standby | Emergency |
| ZL-PSBLP18-2FT-CN | AC110V or 230V | 18w | x | x |
| ZL-PSBLP36-4FT-CN | AC110V or 230V | 36w | x | x |
| ZL-PSBLP44-5FT-CN | AC110V or 230V | 44w | x | x |
| ZL-PSBLP18-2FT-CS | AC110V or 230V | 18w | 100% / 20% /OFF | x |
| ZL-PSBLP36-4FT-CS | AC110V or 230V | 36w | 100% / 20% /OFF | x |
| ZL-PSBLP44-5FT-CS | AC110V or 230V | 44w | 100% / 20% /OFF | x |
| ZL-PSBLP18-2FT-CE | AC110V or 230V | 18w | x | >[email protected] |
| ZL-PSBLP36-4FT-CE | AC110V or 230V | 36w | x | >[email protected] |
| ZL-PSBLP44-5FT-CE | AC110V or 230V | 44w | x | >[email protected] |
| ZL-PSBLP18-2FT-CES | AC110V or 230V | 18w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP36-4FT-CES | AC110V or 230V | 36w | 100% / 20% /OFF | >[email protected] |
| ZL-PSBLP44-5FT-CES | AC110V or 230V | 44w | 100% / 20% /OFF | >[email protected] |
| Note: x –No this function | ||||
About Tunnel Vapor Tight Light, Guess you’re asking:
1. What is the luminous efficacy of Tunnel Vapor Tight Light ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the Tunnel Vapor Tight Light?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the Tunnel Vapor Tight Light?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the Tunnel Vapor Tight Light use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of Tunnel Vapor Tight Light?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the Tunnel Vapor Tight Light?
The Tunnel Vapor Tight Light comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the Tunnel Vapor Tight Light wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the Tunnel Vapor Tight Light have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of Tunnel Vapor Tight Light?
Tunnel Vapor Tight Light with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Application:
This Tunnel Vapor Tight Light is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.
|
|
|
Our Competitive Advantages:
1. ODM/OEM Available; Samples Available; Custom Requirements (Brand/Function)
2. COMLED Technology is a professional provider of emergency LED waterproof batten lighting products and solutions, specializing in the design, production, and sale of Tunnel Vapor Tight Lights for ten years.
3. Factory Area: 2,000 m²; Production Capacity: 30,000 units per month.
4. All LED fixtures undergo strict quality control.
5. Our Tunnel Vapor Tight Lights are CE, SAA, LCP, ISTMT and TM21 certified and comply with regional electrical codes and safety requirements.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Tunnel Vapor Tight Light size dimension:
Packing Specification:
Installation methods:
Our Competitive Advantages:
1. ODM/OEM services available; samples provided; customization options for brand and function.
2. COMLED Technology is a leading provider of emergency Tunnel Vapor Tight Lighting solutions, with a decade of expertise in designing, manufacturing, and selling Tunnel Vapor Tight Light.
3. Factory area: 2,000 m²; Production capacity: 30,000 units per month.
4. All LED fixtures undergo rigorous quality control.
5. Our Tunnel Vapor Tight Light are certified CE, SAA, LCP, ISTMT, and TM21, and meet regional electrical codes and safety standards.
Supply and Sales Range（Main Markets）
Americas EU Australia Middle East HK.
Guess you’re asking:
1. What is the luminous efficacy of Tunnel Vapor Tight Light ?
110-130lm/w.
2. What is the warranty period for this product?
The standard warranty is three years, with an option to extend to five years (3+2 years).
3. What is the diameter of the terminal entry hole for the Tunnel Vapor Tight Light?
The diameter is Φ5.0mm², which allows for simultaneous entry.
4. What are the sensor modes and range for the Tunnel Vapor Tight Light?
Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.
5. What type of battery and emergency time does the Tunnel Vapor Tight Light use?
LiFePO4 battery, 3+ hours 3.6W emergency
6. What is the protection level of Tunnel Vapor Tight Light?
The fixture has a high protection rating of IP65 and IK10.
7. What sizes and power options are available for the Tunnel Vapor Tight Light?
The Tunnel Vapor Tight Light comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.
8. How is the Tunnel Vapor Tight Light wired?
Wiring options include side entry, back entry, and linkable connection.
9. What certifications does the Tunnel Vapor Tight Light have?
The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.
9.What are the certifications of Tunnel Vapor Tight Light?
Tunnel Vapor Tight Light with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.
Conclusion
For infrastructure projects where downtime isn’t an option, the Tunnel Vapor Tight Light is unbeatable for reliability, maintenance and design flexibility. Get in touch today to learn about volume discounts, custom length assemblies or integrated sensor/emergency configurations. We’ll tailor a lighting solution for your underground spaces to be brilliantly lit and safe.
FAQs:
How do I determine the right wattage and spacing for Tunnel Vapor Tight Lights?
Start by mapping out your tunnel length, width and target lux levels per industry guidelines. Smaller passages require 18W units spaced at 1.5-2m, wider spans may need 36W or 44W fixtures at 2-3m. For precision, request a lighting layout from our technical team to model your exact environment.
How do I swap out a driver without cutting power?
Simply loosen the diffuser clips, pull out the driver tray by its handle, slide in the new module and re-secure. The hot-swap mechanism keeps adjacent fixtures live during the process so corridors remain lit and maintenance crews can work quickly.
Can I add motion or daylight sensors to the Tunnel Vapor Tight Light?
Yes. Our fixtures support 5.8GHz high-frequency sensors that dim to 20% when areas are unoccupied and restore to full output on motion detection. You can also add photocell controls to entry portals to maximise energy savings.
How does the fixture perform in extreme temperature or moisture conditions?
Rated -20°C to 40°C, the IP65 enclosure seals out moisture and fine particles, the IK10 shell can withstand up to 20J of impact. Whether in freezing subway shafts or heated parking ramps, performance is consistent.
What custom options are available for bulk orders?
From custom lengths and bracket configurations to integrated emergency backup packs (3000mAh LiFePO4 battery, >3hr runtime), we can accommodate project specific requirements. Get in touch with our sales team for factory-direct pricing and fast lead times.
Additional information
| Model | ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD) |
|---|---|
| Rated Power | 18W/ 36W/ 44W |
| Install | Surface Mount/ Suspended/ Linkable |
| Protection Rating | IP65 IK08 |
| Housing | Polycarbonate |
| Optics | Polycarbonate Milky Diffuser |
| Clips | Polycarbonate or Stainless Steel |
| Connection Type | Terminal Block 3 pin * 5.0 square millimeters |
| Operating Temperature | -20℃ to 40℃(Emergency version: 0℃ to 40℃) |
| Warranty | 5 Years(battery for 1 year) |
| Dimming Option | Microwave Sensor – 3 Stepped Version(100%-20%-OFF) |
| Emergency Option | 3 Hours+ @3.6W – 3000mAh LiFePO4 Battery |
| Luminous Efficacy | 110-140lm/w |
| LED | SMD2835 |
| CCT | 3000K/4000K/5000K/6000K |
| CRI | >80 |
| Beam Angle | 120 degree |
| Input power Supply | AC110 or AC230V, 50/60Hz |
| Power Factor | > 0.9 |
| Lifespan@Ta25° (L70) | 54,000 hours |
| Electrical Classification | Class I |
| Package Dimensions | 690*116*92mm/ 1280*116*92mm/ 1580*116*92mm |
