Best LED Waterproof Batten Lights for Workshop

Description

LED Waterproof Batten Lights, Polycarbonate Milky Diffuser, Wall or Ceiling Surface-Mounted Fitting, AC110 or AC230V, 50/60Hz, LED Wraparound Light

This vapor tight luminaire adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is avalible in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.

 

LED Waterproof Batten Lights basic features

1. Anti-UV milky PC diffuser and PC base, resistant to yellowing over time.

2. IP65 weatherproof rating, IK10 high impact resistance, with silicone seal.

3. High diffusion rate milky cover with a light transmission rate of up to 88%; striped design for even and soft lighting.

4. The base includes extended mounting slots for stainless steel clips, allowing for fine adjustments during installation.

5. PC knob for securing the gear tray, ensuring easy installation.

6. The base with hooker, hanging the gear tray and release hands,easy for wiring. In case of the gear tray falling , and more safety when maintenance.
Stainless steel or plastic clips are available as options.

7. 0.5mm thick iron tray with white paint, offering high intensity and a high reflection rate.

8. Features a customized 1.6mm thick FR4 PCB with 35mil thick copper for enhanced efficiency.

9. Utilizes high-brightness 200lm/W SMD2835 LED chips (LM-80 certified) with low light degradation. The overall light efficiency exceeds 120lm/W, and the color rendering index is RA >83.

10. Includes SMD twin-hole connectors that are easy to plug in and out without soldering, simplifying maintenance and wiring. The symmetrical design of the light strip eliminates the need to consider orientation during replacement.

11. Uses high-temperature-resistant white nylon rivets that can withstand temperatures up to 185°C, making it easy to replace the LED strips.

12. Employs a wiring method with more parallel connections and fewer series connections, ensuring that the failure of a single LED chip does not affect the operation of the entire light.

13. All internal wiring is made with >0.8mm² high-temperature UL-approved wires and 100% copper conductors.

14. Uses stainless steel cam handles and a 1.0mm² ground wire to ensure reliable grounding of the light fixture.

15. Equipped with an IEC-certified 60W high-power, high power factor (>0.9) DC constant current isolated driver, offering ample margin and long lifespan.

16. The driver features a clip-on installation, a half-power DIP switch, and plug-and-play connectors for both input and output, allowing for easy replacement and maintenance.

17. Uses a high-temperature-resistant, large-capacity lithium battery specifically designed for emergency lighting, with an emergency duration of over 3 hours.

18. Features a battery compartment for protection, with plug-and-play terminal connections for easy battery replacement.

19. Utilizes a highly sensitive and stable 5.8 GHz HF microwave sensor with adjustable parameters (brightness, time, distance) for optimal energy savings. The plug-and-play terminal connection allows for easy maintenance.

20. Equipped with a 5.0 mm terminal block for higher safety and quick connection of 2*2.5 mm² wires simultaneously.

21. Includes an external high-brightness emergency status indicator and test button for convenient maintenance and testing.

22. Linkable installation is available, requiring no wiring and making installation simple.

23. Accessories include high-strength 304 stainless steel mounting clips (for surface mounting), nickel-plated stainless steel mounting screws, and an IP65 weatherproof plug (for blocking off pre-cut wire outlets when wiring exits from the back).

24. Individually packaged in cardboard, suitable for retail or wholesale. The fixture is protected by a PP environmental bag to prevent dust and scratches. Additionally, there is a large double-corrugated cardboard box for 9 units.

 

LED Waterproof Batten Lights Main advantages

LED Waterproof Batten Lightss offer the following key benefits over other types of lighting:

1. Quick and easy maintenance replacement

A. The power supply is snap-on;	B. The battery uses a battery compartment, and the battery maintenance is a snap-on replacement;
C. The center panel is secured with aircraft fasteners;	D. Output inputs use plug-in terminals (many parts are plug-in);
E. Body with quick buckles	F. Huge terminal block for holding multiple wires

 

2. The battery adopts LiFePO₄, high temperature resistance, not easy to catch fire, safer and more durable;

3. 60W power supply is used, large margin, 7*24 hours long-term uninterrupted work;

4. The sensor adopts 5.8GHz high sensitivity and high stability microwave sensor, with its own dial code, can adjust a variety of parameters (brightness, time, distance), a variety of dimming modes, suitable for different application scenarios;

5. Test button and indicator light in the light body outside the test panel, convenient for maintenance observation and self-testing;

6. High protection level (IP65 IK10), weatherproof, dustproof and impact resistance.

 

LED Waterproof Batten Lights Parameter data of various specifications

Model	Input voltage	Watt	Sensor Dimming standby	Emergency
ZL-PSBLP18-2FT-CN	AC110V or 230V	18w	x	x
ZL-PSBLP36-4FT-CN	AC110V or 230V	36w	x	x
ZL-PSBLP44-5FT-CN	AC110V or 230V	44w	x	x
ZL-PSBLP18-2FT-CS	AC110V or 230V	18w	100% / 20% /OFF	x
ZL-PSBLP36-4FT-CS	AC110V or 230V	36w	100% / 20% /OFF	x
ZL-PSBLP44-5FT-CS	AC110V or 230V	44w	100% / 20% /OFF	x
ZL-PSBLP18-2FT-CE	AC110V or 230V	18w	x	>[email protected]
ZL-PSBLP36-4FT-CE	AC110V or 230V	36w	x	>[email protected]
ZL-PSBLP44-5FT-CE	AC110V or 230V	44w	x	>[email protected]
ZL-PSBLP18-2FT-CES	AC110V or 230V	18w	100% / 20% /OFF	>[email protected]
ZL-PSBLP36-4FT-CES	AC110V or 230V	36w	100% / 20% /OFF	>[email protected]
ZL-PSBLP44-5FT-CES	AC110V or 230V	44w	100% / 20% /OFF	>[email protected]
Note:  x –No this function

 

Application:

This LED Waterproof Batten Lights is widely used in Metro station, fire stairs, industrial warehouse, underground tunnel, parking lots.

 

 

 

LED Waterproof Batten Lights size dimension:

Packing Specification:

 

Installation methods:

Our Competitive Advantages:

1.  ODM/OEM services available; samples provided; customization options for brand and function.

2. COMLED Technology is a leading provider of emergency LED Waterproof Batten Lightsing solutions, with a decade of expertise in designing, manufacturing, and selling LED Waterproof Batten Lightss.

3. Factory area: 2,000 m²; Production capacity: 30,000 units per month.

4. All LED fixtures undergo rigorous quality control.

5. Our LED Waterproof Batten Lightss are certified CE, SAA, LCP, ISTMT, and TM21, and meet regional electrical codes and safety standards.

 

Supply and Sales Range（Main Markets）

Americas    EU    Australia    Middle    East    HK.

 

Guess you’re asking:

1. What is the luminous efficacy of LED Waterproof Batten Lights ?

110-130lm/w.

2. What is the warranty period for this product?

The standard warranty is three years, with an option to extend to five years (3+2 years).

3. What is the diameter of the terminal entry hole for the LED Waterproof Batten Lights?

The diameter is Φ5.0mm², which allows for simultaneous entry.

4. What are the sensor modes and range for the LED Waterproof Batten Lights?

Sensor mode dimming range includes 100%-20% and 100%-off, 5.8GHz microwave sensing has 8-12m sensing distance.

5. What type of battery and emergency time does the LED Waterproof Batten Lights use?

LiFePO₄ battery, 3+ hours 3.6W emergency

6. What is the protection level of LED Waterproof Batten Lights?

The fixture has a high protection rating of IP65 and IK10.

7. What sizes and power options are available for the LED Waterproof Batten Lights?

The LED Waterproof Batten Lights comes in 3 standard sizes, 2/4/5FT, and the wattage is 18/36/44W respectively.

8. How is the LED Waterproof Batten Lights wired?

Wiring options include side entry, back entry, and linkable connection.

9. What certifications does the LED Waterproof Batten Lights have?

The fixture is certified with CE, SAA, LCP, ISTMT, and TM21, ensuring safety and compliance with quality standards.

9.What are the certifications of LED Waterproof Batten Lights?

LED Waterproof Batten Lights with Sensor has CE, SAA, LCP, ISTMT, TM21 certificates, safety compliance and quality assurance.

 

About LED Waterproof Batten Lights

When it comes to creating a reliable and well lit environment in demanding spaces like workshops, warehouses and industrial areas, the right lighting is key. Enter the Waterproof Batten Light—a great option for those looking for tough and energy efficient lighting. LED technology advanced, these lights perform well and give bright clear light even in harsh, wet areas.

These are perfect for workshops where safety, visibility and durability are paramount. Whether you’re working with heavy machinery, dealing with unpredictable weather or need lights that can withstand high levels of dust and moisture, a waterproof batten light will do the job. With an IP65 rating they are fully dust proof and can withstand water jets so your workspace will be well lit no matter the conditions.

Key Features & Specs:

• High Quality Build: Waterproof batten light has a high grade PC diffuser to increase light transmittance, more efficient and durable.
• SMD2835 LED: Brighter and more consistent light with 110-140lm/W luminous efficacy.
• Wide Size Options: 2FT, 4FT, 5FT to fit different spaces.
• Energy Efficient & Long Lasting: 54,000 hour lifespan, less replacement and lower maintenance cost in the long run.
• Emergency Function: 3000mAh LiFePO4 battery for backup lighting during power failure, your space will be lit when you need it most.
• Reliable Protection: IP65 rating and IK10 impact resistance, these lights can withstand tough environments—tunnels, parking lots, electrical rooms.
• Certification & Compliance: Meets international standards with CE, ROHS, SAA, C-Tick (RCM) approvals, quality and safety assured.

Conclusion

When you’re fitting out a commercial, industrial or engineering space the Waterproof Batten Light is your answer for reliable energy efficient lighting. Whether you’re lighting a workshop, warehouse or any demanding area these lights give great durability, safety and performance. With emergency backup and superior protection against dust and water these LED batten lights are built to withstand your workspace and keep your operation running smoothly.

 

Common Questions:

1. What makes the Waterproof Batten Light suitable for workshop environments?

These lights are designed to endure tough conditions, such as exposure to dust, moisture, and varying temperatures, making them perfect for workshops. Their IP65 rating ensures protection against water jets and dust ingress, while their robust build resists impact and wear, maintaining optimal performance even in demanding environments.

2. How long do waterproof batten lights last?

Waterproof batten lights typically have a lifespan of around 54,000 hours, which means they can last for over 6 years when used for 24 hours a day. This long lifespan minimizes the need for frequent replacements, saving both time and money in the long run.

3. Are these lights energy-efficient?

Yes, these LED batten lights offer a luminous efficacy of 110-140lm/W, ensuring high brightness while using less energy compared to traditional lighting solutions. This results in lower electricity bills and reduced environmental impact.

4. Can these lights be used outdoors?

Absolutely! With their IP65 rating, these lights are resistant to both dust and water, making them ideal for outdoor use in harsh conditions. Whether you’re lighting up a parking lot, tunnel, or outdoor workspace, these lights provide reliable performance regardless of the weather.

5. How does the emergency backup feature work?

The emergency backup feature includes a 3000mAh LiFePO4 battery that kicks in during power outages, ensuring that your space stays illuminated. The battery can provide backup lighting for up to 3 hours, offering peace of mind during unexpected electrical failures.

Additional information

Model	ZL-PSBLP20-2FT(SMD)/ ZL-PSBLP40-4FT(SMD)/ ZL-PSBLP60-5FT(SMD)
Rated Power	18W/ 36W/ 44W
Install	Surface Mount/ Suspended/ Linkable
Protection Rating	IP65 IK08
Housing	Polycarbonate
Optics	Polycarbonate Milky Diffuser
Clips	Polycarbonate or Stainless Steel
Connection Type	Terminal Block 3 pin * 5.0 square millimeters
Operating Temperature	-20℃ to 40℃(Emergency version: 0℃ to 40℃)
Warranty	5 Years(battery for 1 year)
Dimming Option	Microwave Sensor – 3 Stepped Version(100%-20%-OFF)
Emergency Option	3 Hours+ @3.6W – 3000mAh LiFePO4 Battery
Luminous Efficacy	110-140lm/w
LED	SMD2835
CCT	3000K/4000K/5000K/6000K
CRI	>80
Beam Angle	120 degree
Input power Supply	AC110 or AC230V, 50/60Hz
Power Factor	> 0.9
Lifespan@Ta25° (L70)	54,000 hours
Electrical Classification	Class I
Package Dimensions	690*116*92mm/ 1280*116*92mm/ 1580*116*92mm