Perlengkapan lampu tabung LED T8 | Fluorescent Tube Fixture Replacement
- Modern T8 LED Tube Light Fixture Standard
- The Essential Upgrade: Benefits of Fluorescent Tube Replacement
- About COMLED T8 LED Tube Light Fixture
- Partnering with a Leading Tube Fixture Manufacturer
SAYA. Modern T8 LED Tube Light Fixture Standard
Why the T8 LED Tube Light Fixture is Lighting the Way for the Future of Industrial & Pencahayaan Komersial
The integrated T8 LED tube light fixture represents a smart step forward for industrial and commercial lighting. It keeps the same familiar look that installers and facility managers are used to, while packing all the benefits of modern, solid-state lighting. Rather than treating the light as a disposable item inside a clunky old fixture that needs a ballast to work, the integrated fixture is a purpose-built light with the LED, thermal management and driver all working together in harmony. This system-level approach cuts down on hidden failure points, boosts light output and makes the overall cost of ownership way lower over the life of a building.
What is a T8 LED Tube Light Fixture?
A T8 LED tube light fixture is a linear light that's designed to fit in with the familiar 1-inch diameter tubular profile of the T8 form. It takes standard T8 lengths ( think 2-foot, 4-foot and 5-foot units) and puts an LED module and driver inside a dedicated housing. It's primarily designed to swap out old, obsolete fluorescent tube systems for a sleek, integrated LED light that's easier to install, uses less power and lasts a lot longer - all without changing the mounting or layout one bit.
The Case for Seamless Replacement: T8 Tube Light Fixtures Just Make Sense
The beauty of the T8 standard is that it's all about predictability - both mechanically and electrically. Since "T8" just means a 1-inch diameter tube that's 2-5 feet long, the new fixtures will fit right into existing linear spaces in offices, gudang, schools and retail outlets without needing a thing - all existing mounting points, ceiling holes and even fixture footprints stay exactly the same, which means minimal disruption when it comes to installation.
On the electrical side, these new T8 fixtures make life a whole lot easier for electricians. They get rid of the need for external ballasts which is a major win - no more messy wiring and a reduced risk of electrical fires. And because that external ballast is gone, there's one less thing that can go wrong - ballast failure - which is basically eliminated. That means electricians can just focus on wiring the new fixture up, rather than trying to troubleshoot a patchwork of old ballasts across the facility.
Because there's no external ballast needed, the new fixtures also make it way easier to install smart controls like dimming systems and occupancy sensors. The internal driver can be specced for compatibility with these smart controls so you can upgrade to more advanced lighting management without running into compatibility issues with old equipment.
The Anatomy of a High-Quality LED Tube Fixture
A high-quality T8 LED fixture is more than just a tube shape - its actually a carefully designed assembly engineered to deliver consistent light and long life. At the heart of a top-notch fixture there are three crucial parts that really make it tick:
1. Penyebar (Optical Cover with High-Transmittance)
The diffuser helps to soften the glare and spread the light evenly. Premium diffusers use materials that are super good at letting light through and clever optical patterns that ensure the light is spread out nice and evenly across where you need to see it. And by limiting the view of those hotspots on individual LEDs, workers aren't pestered with glare in public and industrial areas. That means they stay more comfortable, and that ultimately means higher productivity and safety.
2. Heatsink and Thermal Control
When it comes down to it, proper thermal management is basically the foundation. LEDs are extra sensitive to heat - high temps really take a toll on their lifespan and output. Jadi, a robust heatsink made from high-conductivity metal that's built right into the housing is a must. And then you've got the added benefit of thoughtful heat pathways, plus good ventilation or plenty of conductive mass, that make sure that light output stays strong over thousands of hours and you don't lose any light prematurely.
3. Built-in Driver (Matched Electronics)
The driver is what takes care of all the electronics, making sure the right current is going to the LEDs and controlling the power. When the driver and LED module are designed to work together, you get consistent light output and better efficiency, not to mention some nice reductions in flicker. And that means you can expect a much smoother ride when interacting with your building's control systems.
To go the extra mile, good-quality fixtures also get the benefit of durable housings, long-lasting end caps, and good seals to keep dust and moisture out where needed. Your choice of material can make all the difference, helping to keep the heat in and the light in good order for as long as possible. And when combined, all these choices help you avoid losing that light too early - which is basically the key difference between something that holds up well over the long term or falls apart after a short time.
Ii. The Essential Upgrade: Benefits of Fluorescent Tube Replacement
Maximum Energy Savings with T8 LED Tube Light Fixture
Fluorescent tubes to modern T8 LED fixtures is an energy optimization strategy. A standard 4 foot fluorescent tube runs 32 watts with 2,900 lumen, 90 lumen per watt. A good Twin Tube T8 LED Fixture runs 18 watts with 2,000-2,600 lumen, 110-140 lumen per watt. That’s 40-60% less power for the same amount of light.
When applied to a large facility, that adds up fast. 1,000 fixtures running 12 jam sehari, LED tubes save over 70 kWh per fixture per year. At a modest utility rate, that’s thousands of dollars per year and reduces peak demand. Reduced heat from LEDs also trims HVAC energy use in conditioned spaces, a secondary savings facility managers often overlook.
Another important factor is the power factor of the LED driver. A system with a power factor above 0.9 operates more efficiently and reduces the apparent power drawn from the grid. In large installations, that avoids strain on transformers and switchgear and can reduce demand charges for facilities where utilities bill in kVA. When procurement teams evaluate upgrade proposals, specifying a high power factor is key to getting the full ROI of LED.
Much Longer Life and Less Maintenance
The difference in life between fluorescent and LED is just as big. Traditional tubes are 20,000 jam. Modern T8 LED fixtures are engineered to L70 above 50,000 jam, more than double that. Over 10 years of commercial use, a fluorescent tube may need to be replaced multiple times, a good LED fixture will go the same 10 years without being touched.That eliminates the recurring headaches of ballast failures, tube burnouts and inconsistent light output. When you factor in maintenance labor – especially in facilities that require lifts, permits, or scheduled downtime – the savings are big. One lamp replacement can cost more than the lamp itself once you add in labor and waste disposal. Eliminate one replacement cycle per fixture across a large project and that’s thousands of dollars in avoided costs and frees up maintenance staff to work on higher value tasks.
Cranking Up Worker Comfort and Safety with Smooth-Running LED Lighting
When it comes to looking beyond the straightforward benefits of energy efficiency and maintenance savings, one thing becomes crystal-clear : lighting is a deal-breaker when it comes to employee comfort and operational safety. LED lighting fixtures switch on instantly, no warm-up delay - a major plus compared to the older, more temperamental fluorescent systems. This means no more fumbling through the dark or scrambling for a flashlight when shift changes happen, a power outage occurs, or the lights do go out for a bit.
But flicker reduction takes it to the next level. Let's face it, many older fluorescent installations with tubes that are on their last legs can be pretty distracting with their flicker - it can cause eye strain, headaches, and even makes it hard to focus. Sementara itu, a good quality LED driver makes sure the light remains stable and flicker-free, even after hours of work. And that's especially important in places where accuracy is everything, like on manufacturing lines, in warehouses, inspection zones or basically any part of a logistics operation : it means fewer mistakes and a safer working environment.
And then there's colour rendering - and it's pretty darn important too. LEDs that have a really high CRI rating (that's Colour Rendering Index, for the uninitiated) deliver colours that look more or less like they're supposed to, which makes everything from labels to safety signs just that bit clearer. Put all that together with some consistent colour temperature across the entire site, and you've got yourself a lighting environment that's balanced, user-friendly - and just plain better for productivity and worker alertness.
AKU AKU AKU. About COMLED T8 LED Tube Light Fixture
Gaya perlengkapan lampu T8 LED
tabung tunggal atau tabung duoble:
Varian tabung tunggal sangat cocok untuk ruang yang lebih kecil atau area yang membutuhkan pencahayaan sedang, Sedangkan opsi tabung ganda memberikan kecerahan yang ditingkatkan untuk ruang atau area yang lebih besar yang membutuhkan pencahayaan yang lebih intensif.
Spesifikasi panjang fixture lampu tabung LED T8:
2KAKI/4 KAKI.
Bahan rumah Perlengkapan Lampu Tabung LED T8:
pelindung kabel / lensa primatik / lensa PC transparan / telanjang.
Diffuser Transparan atau Pelindung Kawat(pilihan)
The LED Tube Light fixture lets you tailor it to your needs with a range of customisation options - and yes, it's got two real stand-outs : a transparent diffuser that lets the light shine in a way that's super smooth & even, and a wire guard that adds a bit of extra protection to keep your lighting looking fresh, even if it's getting knocked about a bit.
Fitur yang dapat dipilih dari lampu tabung LED T8:
Versi Standar / Versi Peredupan Sensor Microwave / Versi darurat / Versi Dali
Fungsi Darurat (pilihan)
LED T8 Tube dengan cadangan darurat,baterai dengan wadah khusus untuk perawatan cepat (pilihan)
The LED Tube Light fixture comes equipped with an emergency function and a specially designed housing for quick and easy maintenance. Ini menggunakan paket baterai LIFEPO4 dengan kapasitas besar dan umur panjang. Baterai kapasitas 3000mAh memberikan durasi darurat awal lebih dari 3 jam.
Fungsi peredupan sensor(pilihan)
5.8Fungsi peredupan Sensor gelombang mikro G HF (pilihan)
This LED Tube Light fixture offers a 5.8G HF microwave sensor dimming function and remote setting capabilities. Sensor gerak memberikan sudut deteksi 160 ° dan a 6-8 jarak sensor meter, memungkinkan pengguna untuk menikmati kontrol yang tepat dan responsif atas kecerahan cahaya (100% / 20% / MATI), dengan mudah mengelola lingkungan pencahayaannya.
T8 LED Tube Dimmable
Deteksi mendeteksi area, tahan waktu,Rasio siaga, Waktu siaga dapat diatur.
This LED Tube Light fixture with a sensor detection mode lets you tweak things to your liking - so you can choose how big an area you want it to detect, how long it holds out when it moves in, how much it's on standby, and just how long it stays that way. That means you can get the lighting system just right for your needs, and save some energy in the process - and it's handy too.
The T8 LED Tube Light Fixture which lets you get fancy with digital dimming and control - that's the DALI version. This lets you seamlessly connect up with the latest lighting management systems, which of course means you can save even more energy and get your lighting just exactly the way you like it.
T8 LED Tube Light Fixtures Parameter Data:
| Model | Tegangan masukan | Watt | Siaga peredupan sensor | Keadaan darurat |
| ZL-JTBLP9-2FT-CN | AC110V atau 230V | 1*9w | X | X |
| ZL-JTBLP18-4FT-CN | AC110V atau 230V | 1*18w | X | X |
| ZL-JTBLP18-2FT-CN | AC110V atau 230V | 2*9w | X | X |
| ZL-JTBLP36-4FT-CN | AC110V atau 230V | 2*18w | X | X |
| ZL-JTBLP9-2FT-CS | AC110V atau 230V | 1*9w | 100% / 20% /MATI | X |
| ZL-JTBLP18-4FT-CS | AC110V atau 230V | 1*18w | 100% / 20% /MATI | X |
| ZL-JTBLP18-2FT-CS | AC110V atau 230V | 2*9w | X | |
| ZL-JTBLP36-4FT-CS | AC110V atau 230V | 2*18w | X | |
| ZL-JTBLP9-2FT-CE | AC110V atau 230V | 1*9w | X | >[email protected] |
| ZL-JTBLP18-4FT-CE | AC110V atau 230V | 1*18w | X | >[email protected] |
| ZL-JTBLP18-2FT-CE | AC110V atau 230V | 2*9w | X | >[email protected] |
| ZL-JTBLP36-4FT-CE | AC110V atau 230V | 2*18w | X | >[email protected] |
| ZL-JTBLP9-2FT-CES | AC110V atau 230V | 1*9w | 100% / 20% /MATI | >[email protected] |
| ZL-JTBLP18-4FT-CES | AC110V atau 230V | 1*18w | 100% / 20% /MATI | >[email protected] |
| ZL-JTBLP18-2FT-CES | AC110V atau 230V | 2*9w | >[email protected] | |
| ZL-JTBLP36-4FT-CES | AC110V atau 230V | 2*18w | >[email protected] | |
| Catatan: X -TIDAK fungsi ini | ||||
Spesifikasi Lampu Tabung LED T8:
Informasi Luminer |
||||
| Model | ZL-JTBLP9-2FT | ZL-JTBLP18-2FT | ZL-JTBLP18-4FT | ZL-JTBLP36-4FT |
| Nilai daya
（Tabung LED） |
1x9w | 2x9w | 1x18w | 2x18w |
| Install | Pemasangan di Permukaan/Ditangguhkan/Dapat Ditautkan | |||
| Peringkat Perlindungan | IP20 | |||
| Perumahan | Baja dengan Lapisan | |||
| Optik | Diffuser susu polikarbonat | |||
| Jenis Koneksi | Blok Terminal atau Dapat Ditautkan | |||
| Suhu Operasional | -20℃ hingga 40℃(Versi darurat: 0℃ hingga 40℃) | |||
| Jaminan | 3 Bertahun-tahun(baterai untuk 1 tahun) | |||
| Opsi Peredupan | Sensor Gelombang Mikro - 3 Versi Melangkah(100%-20%-MATI) | |||
| Opsi Darurat | 3 Hours+ @3W LiFePO4 Battery | |||
Fotometrik |
||||
| Khasiat Bercahaya | 100-120lm/w | |||
| DIPIMPIN | SMD2835 | |||
| CCT | 3000K/4000K/5000K/6000K | |||
| CRI | >80 | |||
| Sudut Balok | 120 derajat | |||
Listrik |
||||
| Catu daya masukan | AC200-240V, 50/60Hz | |||
| Faktor kekuatan | > 0.9 | |||
| Umur@Ta25°(L70) | 54,000 jam | |||
| Klasifikasi Listrik | Kelas I | |||
| Ukuran | 650*113*96mm | 650*113*96mm | 1260*113*96mm | 1260*113*96mm |
Keuntungan dari LED T8 Tube Light Fixture
Lampu tabung LED T8 Lampu menawarkan banyak keuntungan, menjadikannya pilihan populer untuk berbagai kebutuhan pencahayaan. Perlengkapan ini dirancang untuk daya tahan, efisiensi, dan kemudahan pemeliharaan. Berikut beberapa manfaat utama:
Konstruksi yang tahan lama
Perumahan perlengkapan tabung T8 LED terbuat dari baja tebal 0,5mm dengan lapisan putih. Konstruksi yang kuat ini memastikan umur panjang dan perlindungan terhadap faktor lingkungan.
Opsi Inverter Cerdas
Perlengkapan ini dilengkapi dengan inverter pintar opsional, Memberikan kemampuan multi-fungsional yang meningkatkan keserbagunaan dan keandalan sistem pencahayaan.
Pengkabelan yang disederhanakan
Pengkabelan jembatan dalam pemasangan menghilangkan kebutuhan untuk mempertimbangkan arah daya tabung, menyederhanakan proses instalasi. Selain itu, Basis dilengkapi dengan pelacur, membuat kabel lebih mudah dan mencegah baki gear jatuh, memastikan keamanan selama pemeliharaan.
Perawatan Mudah
Mengadopsi lubang kembar SMD dan konektor yang mudah dipasang memungkinkan perawatan dan pengkabelan yang mudah tanpa mengkhawatirkan arah strip LED. Penggunaan suhu tinggi (185°C) paku keling nilon putih tipe tekan memungkinkan penggantian strip LED dengan mudah.
Performa Andal
Perlengkapan ini menggunakan lebih banyak koneksi seri dan lebih sedikit koneksi paralel, memastikan bahwa kegagalan chip LED tunggal tidak mempengaruhi fungsi lampu secara keseluruhan. Semua kabel internal berukuran 0,8 mm² yang disetujui UL suhu tinggi, menggunakan 100% tembaga untuk daya tahan dan keamanan maksimum.
Fitur Keamanan yang Ditingkatkan
Perlengkapan lampu dilengkapi shim baja tahan karat dan kabel arde 1,0 mm², memastikan pembumian yang andal. Pengemudi yang disetujui IEC, dengan faktor daya yang tinggi (hal>0.9) dan driver arus konstan DC, menjamin masa pakai yang lama dan kinerja yang efisien.
Instalasi Driver yang Nyaman
Pengemudi dipasang dengan gesper dan dilengkapi sakelar DIP setengah daya. Koneksi plug-and-play dengan antarmuka input dan output memungkinkan penggantian dan pemeliharaan yang mudah.
Pengkabelan Aman
Pelat tetap kecil yang terpisah dengan lubang 5,0 mm dirancang untuk blok terminal besar, menyediakan kabel yang aman dan mudah untuk kabel 2*2,5mm² secara bersamaan.
Mode dan Pengujian Darurat
Indikator mode darurat eksternal dan tombol tes disertakan, memfasilitasi perawatan dan pengujian perlengkapan yang mudah.
Aplikasi Produk Lampu Tabung LED T8:
For commercial and industrial locations such as supermarkets, gudang, lorong, stasiun kereta bawah tanah, terowongan, dan tempat parkir.
Iv. Partnering with a Leading LED Tube Fixture Manufacturer
Commitment as Premier T8 LED Tube Fixture Maker
We specialise in T8 LED tube systems, taking them from concept to delivery for both wholesale and project customers. Our focus is on delivering reliable performance, repeatable quality, and sound engineering that really makes a difference in day-to-day operation.
- We design our fixtures with thermal stability, optical uniformity and serviceability in mind so each one behaves exactly as you'd expect over its lifespan.
- Our product teams work closely with clients to translate their site needs into production-ready designs – whether that's wall, surface or suspended mounting options, we've got you covered.
- But it's not just about design – we also back that up with the production capacity to match: in-house toolmaking, PCB assembly and final assembly allow us to move fast, keep to tight lead times and offer private-label programs with confidentiality you can rely on.
Jaminan kualitas & International Certification
Meeting global standards is a must when it comes to risk-free procurement. Our product lines have the key international approvals you need – CE, RoHS, UL, SAA and RCM - which makes it much easier for you to get into new markets, satisfy tender requirements, and avoid compliance delays on international projects.
Quality control is serious business with us: we inspect all our incoming materials, verify every component at the component level, check every assembly on the fly, and run multi-stage end-of-line testing. And to ensure everything goes out the door right, we put every production batch through a rigorous burn-in and aging routine, plus random photometric and electrical audits to confirm lumen output, color stability and driver performance before shipping anything. This disciplined approach means you're less likely to have any field problems and can enjoy consistent long-term performance from our products.
Custom Options to Match Your Projects & Brand Requirements
We offer bespoke configurations to match your project or brand needs
- Watt & Keluaran Lumen — We can customise power levels and lumen packages to meet your energy targets and illuminance needs (T8 formats: 9W / 18W / 36W, and we can scale the lumen bins to suit)
- CCT Options — We can offer 3000K, 4000K, 5000K, 6000K – and we keep our binning consistent to keep the colour drift down to a minimum.
- Integrated functions — We can add in microwave motion sensors, 0–10V or PWM dimming interfaces, and on-board emergency backup modules – with a modular approach so they're easy to service in the field without having to replace the whole fixture.
- Branding & Kemasan — We can offer private-label marking, custom packing and documentation packages to suit your international distribution needs.
- Volume Flexibility — We can work with you on project pricing, pilot runs and scalable OEM arrangements to make sure you can match your rollout schedule.
Call to Action - Get Your Wholesale Quote or Custom Specification
Want to know more about bulk pricing, technical drawings, sample evaluation or private-label programs? Get in touch with our sales and engineering team and we'll get back to you with a tailor-made quote and implementation plan. Tell us your target lumen levels, preferred CCT and any control or emergency options you need – we'll do the rest.
FAQ:
What are the key benefits of LED tube light fixtures?
T8 LED tubes are a game-changer when it comes to energy savings & daya tahan. They not only use a lot less power than the old fluorescents but also produce a steadier , more usable light. One of the best things about them is that they run really cool, don't contain any nasty mercury and keep their light output rock solid for years to come - which means lots less hassle with maintenance.
How much energy do T8 LED tubes save compared with fluorescent tubes?
Making the switch typically saves about 40 ke 60% on power usage. And let's be honest - that's some serious cash you're going to save. Whats more a 32 watt fluoro often gets replaced by a 16-18 watt LED that puts out a comparable amount of light - it's a pretty compelling argument for upgrading to LED. Over a big building with loads of fixtures - the savings can really add up and cut down on that energy bill.
Where are LED tube fixtures best used?
The truth of the matter is that they're pretty much suitable for any indoor lighting need you can think of : kantor, gudang, pabrik, pengecer, sekolah & Klinik - you name it. It really depends what you need them for but if you need them to work outdoors you'll want the rugged ones - same with emergency lighting. For jobs like inspection or retail where the quality of the light really matters - go for the ones with the higher color rendering index.
What maintenance do T8 LED tube fixtures need?
Just about nothing - a bit of a clean now and then, & the odd driver check. But because they last so long - hingga 50,000 jam - you don't have to replace them nearly as often as with the old fluorescents. And if you do need to replace them - there's none of that heavy lifting or special equipment involved - its just a simple swap.