T8 LED Tube Light Fixture | Fluorescent Tube Fixture Replacement
- Modern T8 LED Tube Light Fixture Standard
- The Essential Upgrade: Benefits of Fluorescent Tube Replacement
- About COMLED T8 LED Tube Light Fixture
- Partnering with a Leading Tube Fixture Manufacturer
I. Modern T8 LED Tube Light Fixture Standard
Why the T8 LED Tube Light Fixture is Lighting the Way for the Future of Industrial & Soilsiú Tráchtála
The integrated T8 LED tube light fixture represents a smart step forward for industrial and commercial lighting. It keeps the same familiar look that installers and facility managers are used to, while packing all the benefits of modern, solid-state lighting. Rather than treating the light as a disposable item inside a clunky old fixture that needs a ballast to work, the integrated fixture is a purpose-built light with the LED, thermal management and driver all working together in harmony. This system-level approach cuts down on hidden failure points, boosts light output and makes the overall cost of ownership way lower over the life of a building.
What is a T8 LED Tube Light Fixture?
A T8 LED tube light fixture is a linear light that's designed to fit in with the familiar 1-inch diameter tubular profile of the T8 form. It takes standard T8 lengths ( think 2-foot, 4-foot and 5-foot units) and puts an LED module and driver inside a dedicated housing. It's primarily designed to swap out old, obsolete fluorescent tube systems for a sleek, integrated LED light that's easier to install, uses less power and lasts a lot longer - all without changing the mounting or layout one bit.
The Case for Seamless Replacement: T8 Tube Light Fixtures Just Make Sense
The beauty of the T8 standard is that it's all about predictability - both mechanically and electrically. Since "T8" just means a 1-inch diameter tube that's 2-5 feet long, the new fixtures will fit right into existing linear spaces in offices, stórais, schools and retail outlets without needing a thing - all existing mounting points, ceiling holes and even fixture footprints stay exactly the same, which means minimal disruption when it comes to installation.
On the electrical side, these new T8 fixtures make life a whole lot easier for electricians. They get rid of the need for external ballasts which is a major win - no more messy wiring and a reduced risk of electrical fires. And because that external ballast is gone, there's one less thing that can go wrong - ballast failure - which is basically eliminated. That means electricians can just focus on wiring the new fixture up, rather than trying to troubleshoot a patchwork of old ballasts across the facility.
Because there's no external ballast needed, the new fixtures also make it way easier to install smart controls like dimming systems and occupancy sensors. The internal driver can be specced for compatibility with these smart controls so you can upgrade to more advanced lighting management without running into compatibility issues with old equipment.
The Anatomy of a High-Quality LED Tube Fixture
A high-quality T8 LED fixture is more than just a tube shape - its actually a carefully designed assembly engineered to deliver consistent light and long life. At the heart of a top-notch fixture there are three crucial parts that really make it tick:
1. Cíoraí (Optical Cover with High-Transmittance)
The diffuser helps to soften the glare and spread the light evenly. Premium diffusers use materials that are super good at letting light through and clever optical patterns that ensure the light is spread out nice and evenly across where you need to see it. And by limiting the view of those hotspots on individual LEDs, workers aren't pestered with glare in public and industrial areas. That means they stay more comfortable, and that ultimately means higher productivity and safety.
2. Heatsink and Thermal Control
When it comes down to it, proper thermal management is basically the foundation. LEDs are extra sensitive to heat - high temps really take a toll on their lifespan and output. Mar sin, a robust heatsink made from high-conductivity metal that's built right into the housing is a must. And then you've got the added benefit of thoughtful heat pathways, plus good ventilation or plenty of conductive mass, that make sure that light output stays strong over thousands of hours and you don't lose any light prematurely.
3. Built-in Driver (Matched Electronics)
The driver is what takes care of all the electronics, making sure the right current is going to the LEDs and controlling the power. When the driver and LED module are designed to work together, you get consistent light output and better efficiency, not to mention some nice reductions in flicker. And that means you can expect a much smoother ride when interacting with your building's control systems.
To go the extra mile, good-quality fixtures also get the benefit of durable housings, long-lasting end caps, and good seals to keep dust and moisture out where needed. Your choice of material can make all the difference, helping to keep the heat in and the light in good order for as long as possible. And when combined, all these choices help you avoid losing that light too early - which is basically the key difference between something that holds up well over the long term or falls apart after a short time.
I.. The Essential Upgrade: Benefits of Fluorescent Tube Replacement
Maximum Energy Savings with T8 LED Tube Light Fixture
Fluorescent tubes to modern T8 LED fixtures is an energy optimization strategy. A standard 4 foot fluorescent tube runs 32 watts with 2,900 lumens, 90 lumens in aghaidh an vata. A good Twin Tube T8 LED Fixture runs 18 watts with 2,000-2,600 lumens, 110-140 lumens in aghaidh an vata. That’s 40-60% less power for the same amount of light.
When applied to a large facility, that adds up fast. 1,000 fixtures running 12 Uaireanta sa lá, LED tubes save over 70 kWh per fixture per year. At a modest utility rate, that’s thousands of dollars per year and reduces peak demand. Reduced heat from LEDs also trims HVAC energy use in conditioned spaces, a secondary savings facility managers often overlook.
Another important factor is the power factor of the LED driver. A system with a power factor above 0.9 operates more efficiently and reduces the apparent power drawn from the grid. In large installations, that avoids strain on transformers and switchgear and can reduce demand charges for facilities where utilities bill in kVA. When procurement teams evaluate upgrade proposals, specifying a high power factor is key to getting the full ROI of LED.
Much Longer Life and Less Maintenance
The difference in life between fluorescent and LED is just as big. Traditional tubes are 20,000 uair an chloig. Modern T8 LED fixtures are engineered to L70 above 50,000 uair an chloig, more than double that. Over 10 years of commercial use, a fluorescent tube may need to be replaced multiple times, a good LED fixture will go the same 10 years without being touched.That eliminates the recurring headaches of ballast failures, tube burnouts and inconsistent light output. When you factor in maintenance labor – especially in facilities that require lifts, permits, or scheduled downtime – the savings are big. One lamp replacement can cost more than the lamp itself once you add in labor and waste disposal. Eliminate one replacement cycle per fixture across a large project and that’s thousands of dollars in avoided costs and frees up maintenance staff to work on higher value tasks.
Cranking Up Worker Comfort and Safety with Smooth-Running LED Lighting
When it comes to looking beyond the straightforward benefits of energy efficiency and maintenance savings, one thing becomes crystal-clear : lighting is a deal-breaker when it comes to employee comfort and operational safety. LED lighting fixtures switch on instantly, no warm-up delay - a major plus compared to the older, more temperamental fluorescent systems. This means no more fumbling through the dark or scrambling for a flashlight when shift changes happen, a power outage occurs, or the lights do go out for a bit.
But flicker reduction takes it to the next level. Let's face it, many older fluorescent installations with tubes that are on their last legs can be pretty distracting with their flicker - it can cause eye strain, headaches, and even makes it hard to focus. Idir an dá linn, a good quality LED driver makes sure the light remains stable and flicker-free, even after hours of work. And that's especially important in places where accuracy is everything, like on manufacturing lines, in warehouses, inspection zones or basically any part of a logistics operation : it means fewer mistakes and a safer working environment.
And then there's colour rendering - and it's pretty darn important too. LEDs that have a really high CRI rating (that's Colour Rendering Index, for the uninitiated) deliver colours that look more or less like they're supposed to, which makes everything from labels to safety signs just that bit clearer. Put all that together with some consistent colour temperature across the entire site, and you've got yourself a lighting environment that's balanced, user-friendly - and just plain better for productivity and worker alertness.
III. About COMLED T8 LED Tube Light Fixture
T8 Stíl Daingneán Solais Feadán faoi stiúir T8
feadán aonair nó feadán duble:
Tá an t -athraitheach feadán aonair foirfe do spásanna níos lú nó do limistéir a dteastaíonn soilsiú measartha uathu, Cé go seachadann an rogha feadán dúbailte gile feabhsaithe do spásanna nó limistéir níos mó a bhfuil soilsiú níos déine de dhíth orthu.
Sonraíochtaí Fad Fad Solas Solas T8 Feadán faoi stiúir:
2Ft/4ft.
T8 Feadán faoi stiúir ábhair tithíochta:
garda slandaithe / lionsa priosmatach / lionsa ríomhaire trédhearcach / loinn.
Diffuser trédhearcach nó garda sreinge(rogha)
The LED Tube Light fixture lets you tailor it to your needs with a range of customisation options - and yes, it's got two real stand-outs : a transparent diffuser that lets the light shine in a way that's super smooth & faoi mar, and a wire guard that adds a bit of extra protection to keep your lighting looking fresh, even if it's getting knocked about a bit.
Gnéithe roghnaithe den daingneán solais feadán faoi stiúir T8 faoi stiúir:
Leagan caighdeán / Leagan Dimming Braiteoir MICREATHONNACH / Leagan éigeandála / Leagan Dali
Tiúchan éigeandála (rogha)
Feadán T8 faoi stiúir le cúltaca éigeandála,ceallraí le tithíocht speisialta le haghaidh cothabhála gasta (rogha)
The LED Tube Light fixture comes equipped with an emergency function and a specially designed housing for quick and easy maintenance. Baineann sé úsáid as pacáiste ceallraí LifePo4 le cumas mór agus saolré fada. Soláthraíonn an ceallraí toilleadh 3000mAh ré tosaigh éigeandála níos mó ná 3 uair an chloig.
Feidhm dimming braiteora(rogha)
5.8G HF Feidhm Dimming Braiteoir MICREATHONNACH HF (rogha)
This LED Tube Light fixture offers a 5.8G HF microwave sensor dimming function and remote setting capabilities. Soláthraíonn an braiteoir gluaisne uillinn braite 160 ° agus a 6-8 achar braiteora méadair, ligean d'úsáideoirí taitneamh a bhaint as smacht beacht agus sofhreagrach ar ghile an tsolais (100% / 20% / AS), a dtimpeallacht soilsithe a bhainistiú gan stró.
T8 feadán faoi stiúir dimmable
Réimse braite braite, am a shealbhú,Cóimheas Fuireachas, Is féidir am fuireachas a shocrú.
This LED Tube Light fixture with a sensor detection mode lets you tweak things to your liking - so you can choose how big an area you want it to detect, how long it holds out when it moves in, how much it's on standby, and just how long it stays that way. That means you can get the lighting system just right for your needs, and save some energy in the process - and it's handy too.
The T8 LED Tube Light Fixture which lets you get fancy with digital dimming and control - that's the DALI version. This lets you seamlessly connect up with the latest lighting management systems, which of course means you can save even more energy and get your lighting just exactly the way you like it.
T8 LED Tube Light Fixtures Parameter Data:
| Múnla | Voltas ionchuir | Bhata | Braiteoir dimming fuireachas | Éigeandála |
| Zl-jtblp9-2ft-cn | AC110V nó 230V | 1*9w | x | x |
| Zl-jtblp18-4ft-cn | AC110V nó 230V | 1*18w | x | x |
| Zl-jtblp18-2ft-cn | AC110V nó 230V | 2*9w | x | x |
| Zl-jtblp36-4ft-cn | AC110V nó 230V | 2*18w | x | x |
| Zl-jtblp9-2ft-cs | AC110V nó 230V | 1*9w | 100% / 20% /AS | x |
| ZL-JTBLP18-4FT-CS | AC110V nó 230V | 1*18w | 100% / 20% /AS | x |
| ZL-JTBLP18-2FT-CS | AC110V nó 230V | 2*9w | x | |
| Zl-jtblp36-4ft-cs | AC110V nó 230V | 2*18w | x | |
| ZL-JTBLP9-2FT-CE | AC110V nó 230V | 1*9w | x | >[email protected] |
| ZL-JTBLP18-4ft-CE | AC110V nó 230V | 1*18w | x | >[email protected] |
| ZL-JTBLP18-2FT-CE | AC110V nó 230V | 2*9w | x | >[email protected] |
| Zl-jtblp36-4ft-cece | AC110V nó 230V | 2*18w | x | >[email protected] |
| Zl-jtblp9-2ft-ces | AC110V nó 230V | 1*9w | 100% / 20% /AS | >[email protected] |
| ZL-JTBLP18-4FT-CES | AC110V nó 230V | 1*18w | 100% / 20% /AS | >[email protected] |
| ZL-JTBLP18-2FT-CES | AC110V nó 230V | 2*9w | >[email protected] | |
| Zl-jtblp36-4ft-ces | AC110V nó 230V | 2*18w | >[email protected] | |
| Nóta: x -Níl an fheidhm seo | ||||
Sonraíocht daingneáin solais feadán faoi stiúir T8 faoi stiúir:
Faisnéis Luminaire |
||||
| Múnla | Zl-jtblp9-2ft | Zl-jtblp18-2ft | Zl-jtblp18-4ft | Zl-jtblp36-4ft |
| Cumhacht Rátáil
（Tube faoi stiúir） |
1x9W | 2x9W | 1x18w | 2x18w |
| Suiteáil | Dromchla Feistithe/Ar Fionraí/Innasctha | |||
| Rátáil Cosanta | IP20 | |||
| Tithíocht | Cruach le sciath | |||
| Optaic | Polycarbonate Bó Finne Diffuser | |||
| Cineál Ceangail | Bloc Teirminéil nó Innasctha | |||
| Teocht Oibriúcháin | -20℃ go 40 ℃(Leagan éigeandála: 0℃ go 40 ℃) | |||
| Bharántas | 3 Blianta(ceallraí le haghaidh 1 bhliain) | |||
| Rogha dimming | Braiteoir MICREATHONNACH - 3 Leagan Céimnithe(100%-20%-AS) | |||
| Rogha Éigeandála | 3 Uaireanta+ ceallraí @3W LifePo4 | |||
Photometric |
||||
| Éifeachtúlacht lonrúil | 100-120lm/w | |||
| stiúir | SMD2835 | |||
| CCT | 3000K/4000K/5000K/6000K | |||
| CRI | >80 | |||
| Uillinn Bhíoma | 120 céime | |||
Electrical |
||||
| Soláthar cumhachta ionchuir | AC200-240V, 50/60Hz | |||
| Fachtóir Cumhachta | > 0.9 | |||
| Saolré@Ta25°(L70) | 54,000 uair an chloig | |||
| Aicmiú Leictreach | Aicme I | |||
| Toisí | 650*113*96mm | 650*113*96mm | 1260*113*96mm | 1260*113*96mm |
Buntáistí a bhaineann le daingneán solais faoi stiúir T8 feadán
Tá go leor buntáistí ag baint le daingneáin éadroma feadán faoi stiúir T8, Rogha coitianta a dhéanamh dóibh do riachtanais éagsúla soilsithe. Tá na daingneáin seo deartha le haghaidh marthanacht, éifeachtúlacht, agus éascaíocht cothabhála. Seo roinnt buntáistí tábhachtacha:
Tógáil marthanach
Déantar tithíocht an daingneáin solais faoi stiúir T8 feadán as cruach tiubh 0.5mm le sciath bán. Cinntíonn an tógáil láidir seo fad saoil agus cosaint i gcoinne tosca comhshaoil.
Rogha inverter cliste
Tagann na daingneáin seo le inverter cliste roghnach, cumais ilfheidhmeacha a sholáthar a fheabhsaíonn solúbthacht agus iontaofacht an chórais soilsithe.
Sreangú simplithe
Cuireann sreangú an droichid sa fheistiú deireadh leis an ngá le treo cumhachta an fheadáin a bhreithniú, An próiseas suiteála a shimpliú. Ina theannta sin, Tá hooker feistithe ar an mbonn, Sreangú a dhéanamh níos éasca agus cosc a chur ar an tráidire giair titim, Sábháilteacht a chinntiú le linn cothabhála.
Cothabháil Éasca
Le glacadh le poill cúpla SMD agus cónaisc plugáilte go héasca is féidir cothabháil agus sreangú simplí a dhéanamh gan a bheith buartha faoi threo na stiallacha LED. Úsáid ardteochta a úsáid (185° C) Cuireann seamanna níolóin bán de chineál-phreas ar chumas athsholáthar éasca na stiallacha LED.
Feidhmíocht iontaofa
Fostaíonn an daingneán níos mó naisc sraithe agus níos lú nasc comhthreomhar, a chinntiú nach dtéann teip sliseanna faoi stiúir aonair i bhfeidhm ar fheidhmiúlacht fhoriomlán an tsolais. Tá na sreanga inmheánacha go léir 0.8mm² ardteochta UL-cheadaithe, sé 100% copar le haghaidh marthanacht agus sábháilteachta uasta.
Gnéithe sábháilteachta feabhsaithe
Cuimsíonn an daingneán solais shim cruach dhosmálta agus sreang cré 1.0mm², ag cinntiú cré iontaofa. An tiománaí atá faofa ag IEC, le fachtóir ardchumhachta (Pth>0.9) agus DC Tiománaí reatha leanúnach, ráthaíonn sé saolré fada agus feidhmíochta éifeachtach.
Suiteáil áisiúil tiománaí
Tá an tiománaí socraithe le búcla agus tá lasc snámha leathchumhachta ann. Ceadaíonn an nasc plug-agus-súgartha le comhéadain ionchuir agus aschuir athsholáthar agus cothabháil éasca.
Sreangú slán
Tá pláta beag seasta ar leithligh le poll 5.0mm deartha le haghaidh bloc mór teirminéil, sreangú sábháilte agus éasca a sholáthar do shreanga 2*2.5mm² le chéile.
Mód agus tástáil éigeandála
Tá táscaire agus cnaipe tástála mód éigeandála seachtrach san áireamh, Cothabháil agus tástáil éasca an daingneáin a éascú.
Feidhmchlár Táirge Solas Solas T8 Feadán faoi stiúir:
For commercial and industrial locations such as supermarkets, stórais, pasáistí, stáisiúin fobhealach, tollán, agus go leor páirceála.
IV. Partnering with a Leading LED Tube Fixture Manufacturer
Commitment as Premier T8 LED Tube Fixture Maker
We specialise in T8 LED tube systems, taking them from concept to delivery for both wholesale and project customers. Our focus is on delivering reliable performance, repeatable quality, and sound engineering that really makes a difference in day-to-day operation.
- We design our fixtures with thermal stability, optical uniformity and serviceability in mind so each one behaves exactly as you'd expect over its lifespan.
- Our product teams work closely with clients to translate their site needs into production-ready designs – whether that's wall, surface or suspended mounting options, we've got you covered.
- But it's not just about design – we also back that up with the production capacity to match: in-house toolmaking, PCB assembly and final assembly allow us to move fast, keep to tight lead times and offer private-label programs with confidentiality you can rely on.
Quality Assurance & International Certification
Meeting global standards is a must when it comes to risk-free procurement. Our product lines have the key international approvals you need – CE, RoHS, OLmhar, SAA and RCM - which makes it much easier for you to get into new markets, satisfy tender requirements, and avoid compliance delays on international projects.
Quality control is serious business with us: we inspect all our incoming materials, verify every component at the component level, check every assembly on the fly, and run multi-stage end-of-line testing. And to ensure everything goes out the door right, we put every production batch through a rigorous burn-in and aging routine, plus random photometric and electrical audits to confirm lumen output, color stability and driver performance before shipping anything. This disciplined approach means you're less likely to have any field problems and can enjoy consistent long-term performance from our products.
Custom Options to Match Your Projects & Brand Requirements
We offer bespoke configurations to match your project or brand needs
- Wattage & Lumen Output — We can customise power levels and lumen packages to meet your energy targets and illuminance needs (T8 formats: 9W / 18W / 36W, and we can scale the lumen bins to suit)
- CCT Options — We can offer 3000K, 4000K, 5000K, 6000K – and we keep our binning consistent to keep the colour drift down to a minimum.
- Integrated functions — We can add in microwave motion sensors, 0–10V or PWM dimming interfaces, and on-board emergency backup modules – with a modular approach so they're easy to service in the field without having to replace the whole fixture.
- Branding & Pacáistiú — We can offer private-label marking, custom packing and documentation packages to suit your international distribution needs.
- Volume Flexibility — We can work with you on project pricing, pilot runs and scalable OEM arrangements to make sure you can match your rollout schedule.
Call to Action - Get Your Wholesale Quote or Custom Specification
Want to know more about bulk pricing, technical drawings, sample evaluation or private-label programs? Get in touch with our sales and engineering team and we'll get back to you with a tailor-made quote and implementation plan. Tell us your target lumen levels, preferred CCT and any control or emergency options you need – we'll do the rest.
CCanna:
What are the key benefits of LED tube light fixtures?
T8 LED tubes are a game-changer when it comes to energy savings & marthanacht. They not only use a lot less power than the old fluorescents but also produce a steadier , more usable light. One of the best things about them is that they run really cool, don't contain any nasty mercury and keep their light output rock solid for years to come - which means lots less hassle with maintenance.
How much energy do T8 LED tubes save compared with fluorescent tubes?
Making the switch typically saves about 40 chuig 60% on power usage. And let's be honest - that's some serious cash you're going to save. Whats more a 32 watt fluoro often gets replaced by a 16-18 watt LED that puts out a comparable amount of light - it's a pretty compelling argument for upgrading to LED. Over a big building with loads of fixtures - the savings can really add up and cut down on that energy bill.
Where are LED tube fixtures best used?
The truth of the matter is that they're pretty much suitable for any indoor lighting need you can think of : oifigí, stórais, monarchana, miondíol, scoil & clinics - you name it. It really depends what you need them for but if you need them to work outdoors you'll want the rugged ones - same with emergency lighting. For jobs like inspection or retail where the quality of the light really matters - go for the ones with the higher color rendering index.
What maintenance do T8 LED tube fixtures need?
Just about nothing - a bit of a clean now and then, & the odd driver check. But because they last so long - suas go dtí 50,000 uair an chloig - you don't have to replace them nearly as often as with the old fluorescents. And if you do need to replace them - there's none of that heavy lifting or special equipment involved - its just a simple swap.